Kyle McMartin wrote:
From: Grant Grundler <[EMAIL PROTECTED]>
The obvious safe registers to read is one from PCI config space.
Signed-off-by: Grant Grundler <[EMAIL PROTECTED]>
Signed-off-by: Kyle McMartin <[EMAIL PROTECTED]>
---
drivers/net/tulip/tulip_core.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 6b54572..81905f4 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -295,12 +295,14 @@ static void tulip_up(struct net_device *
/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
iowrite32(0x00000001, ioaddr + CSR0);
+ pci_read_config_dword(tp->pdev, PCI_COMMAND, &i); /* flush write */
udelay(100);
/* Deassert reset.
Wait the specified 50 PCI cycles after a reset by initializing
Tx and Rx queues and the address filter list. */
iowrite32(tp->csr0, ioaddr + CSR0);
+ pci_read_config_dword(tp->pdev, PCI_COMMAND, &i); /* flush write */
udelay(100);
OK
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
