Add in-band autonegotation support for 10GBase-KR mode.
Signed-off-by: Russell King <[email protected]>
---
drivers/net/phy/phylink.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index dc0f4d7b7dd2..32917bdd1432 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -266,6 +266,23 @@ static int phylink_parse_mode(struct phylink *pl, struct
device_node *np)
pl->link_an_mode = MLO_AN_8023Z;
break;
+ case PHY_INTERFACE_MODE_10GKR:
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+ phylink_set(pl->supported, 100baseT_Half);
+ phylink_set(pl->supported, 100baseT_Full);
+ phylink_set(pl->supported, 1000baseT_Half);
+ phylink_set(pl->supported, 1000baseT_Full);
+ phylink_set(pl->supported, 1000baseX_Full);
+ phylink_set(pl->supported, 10000baseKR_Full);
+ phylink_set(pl->supported, 10000baseCR_Full);
+ phylink_set(pl->supported, 10000baseSR_Full);
+ phylink_set(pl->supported, 10000baseLR_Full);
+ phylink_set(pl->supported, 10000baseLRM_Full);
+ phylink_set(pl->supported, 10000baseER_Full);
+ pl->link_an_mode = MLO_AN_SGMII;
+ break;
+
default:
netdev_err(pl->netdev,
"incorrect link mode %s for in-band
status\n",
--
2.7.4
