From: Huy Nguyen <h...@mellanox.com>
Remove the following module event counters out of ethtool stats. The
reason for removing these event counters is that these events do not
occur without techinician's intervention.
module_pwr_budget_exd
module_long_range
module_no_eeprom
module_enforce_part
module_unknown_id
module_unknown_status
module_plug
Fixes: bedb7c909c19 ("net/mlx5e: Add port module event counters to ethtool
stats")
Signed-off-by: Huy Nguyen <h...@mellanox.com>
Reviewed by: Gal Pressman <g...@mellanox.com>
Signed-off-by: Saeed Mahameed <sae...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
index 53e4992d6511..f81c3aa60b46 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
@@ -417,20 +417,13 @@ struct mlx5e_stats {
};
static const struct counter_desc mlx5e_pme_status_desc[] = {
- { "module_plug", 0 },
{ "module_unplug", 8 },
};
static const struct counter_desc mlx5e_pme_error_desc[] = {
- { "module_pwr_budget_exd", 0 }, /* power budget exceed */
- { "module_long_range", 8 }, /* long range for non MLNX cable */
- { "module_bus_stuck", 16 }, /* bus stuck (I2C or data shorted) */
- { "module_no_eeprom", 24 }, /* no eeprom/retry time out */
- { "module_enforce_part", 32 }, /* enforce part number list */
- { "module_unknown_id", 40 }, /* unknown identifier */
- { "module_high_temp", 48 }, /* high temperature */
+ { "module_bus_stuck", 16 }, /* bus stuck (I2C or data shorted) */
+ { "module_high_temp", 48 }, /* high temperature */
{ "module_bad_shorted", 56 }, /* bad or shorted cable/module */
- { "module_unknown_status", 64 },
};
#endif /* __MLX5_EN_STATS_H__ */
--
2.11.0
