The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.
Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <danie...@cisco.com>
Signed-off-by: Andrew Lunn <and...@lunn.ch>
---
v2:
Forgot netdev
drivers/net/phy/marvell.c | 67 ++++++++++++++++++++++++++---------------------
1 file changed, 37 insertions(+), 30 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 88cd97b44ba6..77221d3f254f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -267,35 +267,6 @@ static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
- /* The Marvell PHY has an errata which requires
- * that certain registers get written in order
- * to restart autonegotiation
- */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x1f);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x200c);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x5);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x100);
- if (err < 0)
- return err;
-
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
return err;
@@ -328,6 +299,42 @@ static int marvell_config_aneg(struct phy_device *phydev)
return 0;
}
+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* This Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation
+ */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ return marvell_config_aneg(phydev);
+}
+
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int err;
@@ -1960,7 +1967,7 @@ static struct phy_driver marvell_drivers[] = {
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
.config_init = &marvell_config_init,
- .config_aneg = &marvell_config_aneg,
+ .config_aneg = &m88e1101_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
--
2.11.0
