From: Gal Pressman <g...@mellanox.com>
Query the operational pause from firmware (PFCC register) instead of
always passing zeros.
Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Gal Pressman <g...@mellanox.com>
Cc: kernel-t...@fb.com
Signed-off-by: Saeed Mahameed <sae...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 0a7734761ece..87a7a66363de 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -855,6 +855,8 @@ static int mlx5e_get_link_ksettings(struct net_device
*netdev,
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0};
+ u32 rx_pause = 0;
+ u32 tx_pause = 0;
u32 eth_proto_cap;
u32 eth_proto_admin;
u32 eth_proto_lp;
@@ -877,11 +879,13 @@ static int mlx5e_get_link_ksettings(struct net_device
*netdev,
an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
an_status = MLX5_GET(ptys_reg, out, an_status);
+ mlx5_query_port_pause(mdev, &rx_pause, &tx_pause);
+
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
get_supported(eth_proto_cap, link_ksettings);
- get_advertising(eth_proto_admin, 0, 0, link_ksettings);
+ get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings);
get_speed_duplex(netdev, eth_proto_oper, link_ksettings);
eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
--
2.11.0
