On Mon, May 8, 2017 at 12:54 PM, Joao Pinto <joao.pi...@synopsys.com> wrote: > Hi Andy and Jan, > > Às 10:36 AM de 5/8/2017, Andy Shevchenko escreveu: >> On Mon, May 8, 2017 at 9:56 AM, Jan Kiszka <jan.kis...@siemens.com> wrote: >>> On 2017-03-15 12:04, Joao Pinto wrote: >>>> This patch prepares DMA Operation Mode configuration for multiple queues. >>>> The work consisted on breaking the DMA operation Mode configuration >>>> function >>>> into RX and TX scope and adapting its mechanism in stmmac_main. >> >>> Starting with this patch, the stmmac-based network adapters of the Intel >>> Quark SoC stop working. I'm getting an IP via DHCP, I can ping, but TCP >>> connections can no longer be established.
>> JFYI: With today's linux-next when _kexec:ed_ kernel boots I tried and >> got the following: >> >> >> # ip a s >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000 >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >> inet 127.0.0.1/8 scope host lo >> valid_lft forever preferred_lft forever >> inet6 ::1/128 scope host >> valid_lft forever preferre[ 130.403995] random: fast init done >> d_lft forever >> 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 >> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff >> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 >> link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff >> 4: sit0@NONE: <NOARP> mtu 1480 qdisc noop qlen 1000 >> link/sit 0.0.0.0 brd 0.0.0.0 >> # udhcpc -i eth0 >> udhcpc: started, v1.26.2 >> [ 140.825131] stmmaceth 0000:00:14.6 eth0: device MAC address >> 98:4f:ee:05:ac:47 >> [ 140.834304] Generic PHY stmmac-a6:01: attached PHY driver [Generic >> PHY] (mii_bus:phy_addr=stmmac-a6:01, irq=-1) >> [ 140.930871] stmmaceth 0000:00:14.6 eth0: IEEE 1588-2008 Advanced >> Timestamp supported >> [ 140.941109] stmmaceth 0000:00:14.6 eth0: registered PTP clock >> [ 140.953626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> udhcpc: sending discover >> [ 142.979557] stmmaceth 0000:00:14.6 eth0: Link is Up - 100Mbps/Full >> - flow control off >> [ 142.988756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> [ 142.998810] BUG: unable to handle kernel NULL pointer dereference at >> (null) >> [ 143.006193] IP: stmmac_xmit+0xf1/0x1080 >> [ 143.010168] *pde = 00000000 >> [ 143.010177] >> [ 143.014762] Oops: 0002 [#1] >> [ 143.017672] Modules linked in: at24 nvmem_core pwm_pca9685 >> [ 143.023338] CPU: 0 PID: 0 Comm: swapper Not tainted 4.11.0-next-20170508+ >> #2 >> [ 143.030539] task: c8533580 task.stack: c852c000 >> [ 143.035237] EIP: stmmac_xmit+0xf1/0x1080 >> [ 143.039302] EFLAGS: 00010216 CPU: 0 >> [ 143.042915] EAX: 00000000 EBX: 00000050 ECX: 00000000 EDX: ceb6a0c0 >> [ 143.049326] ESI: 00000000 EDI: cdd16000 EBP: cdc25d70 ESP: cdc25d20 >> [ 143.055735] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 >> [ 143.061271] CR0: 80050033 CR2: 00000000 CR3: 0eb5c000 CR4: 00100010 >> [ 143.067671] Call Trace: >> [ 143.070238] <SOFTIRQ> >> [ 143.072763] dev_hard_start_xmit+0x7c/0x1a0 >> [ 143.077120] sch_direct_xmit+0xf0/0x120 >> [ 143.081130] __dev_queue_xmit+0x181/0x430 >> [ 143.085311] ? eth_commit_mac_addr_change+0x20/0x20 >> [ 143.090362] dev_queue_xmit+0xa/0x10 >> [ 143.094100] neigh_resolve_output+0xdb/0x190 >> [ 143.098561] ip6_finish_output2+0x184/0x500 >> [ 143.102945] ip6_finish_output+0x91/0xe0 >> [ 143.107057] ? ip6_finish_output+0x91/0xe0 >> [ 143.111338] ip6_output+0x36/0x110 >> [ 143.114924] ? ip6_fragment+0xb00/0xb00 >> [ 143.118935] mld_sendpack+0x191/0x2b0 >> [ 143.122769] ? mld_newpack+0xda/0x180 >> [ 143.126598] ? ipv6_icmp_sysctl_init+0x30/0x30 >> [ 143.131224] mld_ifc_timer_expire+0x158/0x240 >> [ 143.135756] ? find_next_bit+0xa/0x10 >> [ 143.139584] ? mld_dad_timer_expire+0x50/0x50 >> [ 143.144112] call_timer_fn+0x2a/0xf0 >> [ 143.147862] ? mld_dad_timer_expire+0x50/0x50 >> [ 143.152395] run_timer_softirq+0x158/0x300 >> [ 143.156668] ? file_free_rcu+0x1e/0x30 >> [ 143.160589] __do_softirq+0xc4/0x200 >> [ 143.164341] ? __hrtimer_tasklet_trampoline+0x30/0x30 >> [ 143.169575] do_softirq_own_stack+0x1e/0x30 >> [ 143.173902] </SOFTIRQ> >> [ 143.176502] irq_exit+0x95/0xa0 >> [ 143.179812] smp_apic_timer_interrupt+0x31/0x40 >> [ 143.184530] apic_timer_interrupt+0x32/0x40 >> [ 143.188889] EIP: default_idle+0xc/0x70 >> [ 143.192774] EFLAGS: 00000246 CPU: 0 >> [ 143.196386] EAX: 00000000 EBX: 00000000 ECX: 00000001 EDX: 00000000 >> [ 143.202795] ESI: 00000000 EDI: c8533580 EBP: c852df54 ESP: c852df4c >> [ 143.209205] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 >> [ 143.214780] arch_cpu_idle+0x9/0x10 >> [ 143.218446] default_idle_call+0x17/0x30 >> [ 143.222551] do_idle+0xed/0x130 >> [ 143.225873] cpu_startup_entry+0x15/0x20 >> [ 143.229965] rest_init+0x5c/0x60 >> [ 143.233370] start_kernel+0x313/0x318 >> [ 143.237221] i386_start_kernel+0x98/0x9c >> [ 143.241315] startup_32_smp+0x16b/0x16d >> [ 143.245289] Code: 84 45 06 00 00 c1 e2 05 03 94 c7 9c 09 00 00 89 >> 55 b0 8b 45 c8 8b 75 bc 8b 55 d8 8d 1c 80 89 >> 75 e4 c1 e3 03 8b 84 1f a4 09 00 00 <89> 14 b0 8b 87 40 0d 00 00 8b 40 >> 24 85 c0 89 45 b8 0f 85 68 02 >> [ 143.264746] EIP: stmmac_xmit+0xf1/0x1080 SS:ESP: 0068:cdc25d20 >> [ 143.270727] CR2: 0000000000000000 >> [ 143.274175] ---[ end trace 79da8ef70f8b98d7 ]--- >> [ 143.278925] Kernel panic - not syncing: Fatal exception in interrupt >> [ 143.285433] Kernel Offset: 0x6a00000 from 0xc1000000 (relocation >> range: 0xc0000000-0xd05effff) >> [ 143.294268] ---[ end Kernel panic - not syncing: Fatal exception in >> interrupt >> >> > > Are you using the same version of Ethernet IP, 10/100? I'm running on Intel Galileo Gen2 board (v4.11 by the way works fine with direct boot from SD card) > Could you please verify if the crash you are experiencing is this place? > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n2956 > > I would say that for rather old IPs, the napi is not capable of giving a valid > queue number. Could you please print the queue index returned by this line? > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#n2948 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2953,7 +2953,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int enh_desc; unsigned int des; + pr_info("%s <<< 1: priv %p, queue: %u\n", __func__, priv, queue); tx_q = &priv->tx_queue[queue]; + pr_info("%s <<< 2: priv %p, queue: %u tx_q: %p\n", __func__, priv, queue, tx_q); [ 101.591040] stmmac_xmit <<< 1: priv cdd1c4c0, queue: 7 [ 101.596377] stmmac_xmit <<< 2: priv cdd1c4c0, queue: 7 tx_q: cdd1caac Also noticed warning that have to be addressed: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2504:49: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2504:49: expected void [noderef] <asn:2>*ioaddr drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2504:49: got struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function ‘init_dma_rx_desc_rings’: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1274:15: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] while (queue >= 0) { ^~ -- With Best Regards, Andy Shevchenko
