Hi Andy, On 2017-04-20 19:48, Andy Duan wrote: > On 2017年04月20日 07:15, Stefan Agner wrote: >> I tested again with imx6sx-fec compatible string. I could reproduce it >> on a Colibri with i.MX 7Dual. But not always: It really depends whether >> queue 2 is counting up or not. Just after boot, I check /proc/interrupts >> twice, if queue 2 is counting it will happen! >> >> But if only queue 0 is mostly in use, then it seems to work just fine. > If your case is only running best effort like tcp/udp, you can re-set > the "fsl,num-tx-queues" and "fsl,num-rx-queues" to 1 in board dts file. > Other two queues are for AVB audio/video queues, they have high priority > than queue 0. If running iperf tcp test on the three queues, then > the tcp segment may be out-of-order that cause net watchdog timeout. >> >> I also tried i.MX 7Dual SabreSD here, and the same thing. I had to >> reboot 3 times, then queue 2 was counting: >> 57: 8 GIC-0 150 Level 30be0000.ethernet >> 58: 20137 GIC-0 151 Level 30be0000.ethernet >> 59: 9269 GIC-0 152 Level 30be0000.ethernet >> >> It took me about 40 minutes on Sabre until it happened, and I had to >> force it using iperf, but then I got the ring dumps: > My board had ran more than 47 hours with nfs rootfs in 4.11.0-rc6, but > not running iperf. > I am testing with iperf.
Any update on this issue? When using iperf (server) on the board with Linux 4.11 the issue appears within a few iperf iterations on a Sabre (TO 1.2, Board Rev C, if that matters)... root@colibri-imx7:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.10.70 port 5001 connected with 192.168.10.1 port 60524 random: crng init done [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 1.06 GBytes 909 Mbits/sec [ 5] local 192.168.10.70 port 5001 connected with 192.168.10.1 port 60528 [ 5] 0.0-10.0 sec 1.07 GBytes 919 Mbits/sec [ 4] local 192.168.10.70 port 5001 connected with 192.168.10.1 port 60562 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x248/0x24c NETDEV WATCHDOG: eth0 (fec): transmit queue 1 timed out Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0 #360 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0226930>] (unwind_backtrace) from [<c0222ffc>] (show_stack+0x10/0x14) [<c0222ffc>] (show_stack) from [<c04d4f78>] (dump_stack+0x78/0x8c) [<c04d4f78>] (dump_stack) from [<c0236b38>] (__warn+0xe8/0x100) [<c0236b38>] (__warn) from [<c0236b88>] (warn_slowpath_fmt+0x38/0x48) [<c0236b88>] (warn_slowpath_fmt) from [<c0806154>] (dev_watchdog+0x248/0x24c) [<c0806154>] (dev_watchdog) from [<c028a9a0>] (call_timer_fn+0x28/0x98) [<c028a9a0>] (call_timer_fn) from [<c028aab0>] (expire_timers+0xa0/0xac) [<c028aab0>] (expire_timers) from [<c028ab58>] (run_timer_softirq+0x9c/0x194) [<c028ab58>] (run_timer_softirq) from [<c023b110>] (__do_softirq+0x114/0x234) [<c023b110>] (__do_softirq) from [<c023b4fc>] (irq_exit+0xcc/0x108) [<c023b4fc>] (irq_exit) from [<c027a1a0>] (__handle_domain_irq+0x80/0xec) [<c027a1a0>] (__handle_domain_irq) from [<c0201544>] (gic_handle_irq+0x48/0x8c) [<c0201544>] (gic_handle_irq) from [<c0223ab8>] (__irq_svc+0x58/0x8c) Exception stack(0xc1001f28 to 0xc1001f70) 1f20: 00000001 00000000 00000000 c0230060 c1000000 c1003d80 1f40: c1003d34 c0e72f50 c0bd9a04 c1001f80 00000000 00000000 0000320a c1001f78 1f60: c022070c c0220710 600e0013 ffffffff [<c0223ab8>] (__irq_svc) from [<c0220710>] (arch_cpu_idle+0x38/0x3c) [<c0220710>] (arch_cpu_idle) from [<c026f4e0>] (do_idle+0x170/0x204) [<c026f4e0>] (do_idle) from [<c026f82c>] (cpu_startup_entry+0x18/0x1c) [<c026f82c>] (cpu_startup_entry) from [<c0e00c88>] (start_kernel+0x394/0x3a0) ---[ end trace 86a38600d1b9e2a5 ]--- fec 30be0000.ethernet eth0: TX ring dump Nr SC addr len SKB 0 0x1c00 0x00000000 42 (null) 1 H 0x1c00 0x00000000 86 (null) -- Stefan
