Paolo Abeni <pab...@redhat.com> wrote:

>On slave list updates, the bonding driver computes its hard_header_len
>as the maximum of all enslaved devices's hard_header_len.
>If the slave list is empty, e.g. on last enslaved device removal,
>ETH_HLEN is used.
>
>Since the bonding header_ops are set only when the first enslaved
>device is attached, the above can lead to header_ops->create()
>being called with the wrong skb headroom in place.
>
>If bond0 is configured on top of ipoib devices, with the
>following commands:
>
>ifup bond0
>for slave in $BOND_SLAVES_LIST; do
>       ip link set dev $slave nomaster
>done
>ping -c 1 <ip on bond0 subnet>
>
>we will obtain a skb_under_panic() with a similar call trace:
>       skb_push+0x3d/0x40
>       push_pseudo_header+0x17/0x30 [ib_ipoib]
>       ipoib_hard_header+0x4e/0x80 [ib_ipoib]
>       arp_create+0x12f/0x220
>       arp_send_dst.part.19+0x28/0x50
>       arp_solicit+0x115/0x290
>       neigh_probe+0x4d/0x70
>       __neigh_event_send+0xa7/0x230
>       neigh_resolve_output+0x12e/0x1c0
>       ip_finish_output2+0x14b/0x390
>       ip_finish_output+0x136/0x1e0
>       ip_output+0x76/0xe0
>       ip_local_out+0x35/0x40
>       ip_send_skb+0x19/0x40
>       ip_push_pending_frames+0x33/0x40
>       raw_sendmsg+0x7d3/0xb50
>       inet_sendmsg+0x31/0xb0
>       sock_sendmsg+0x38/0x50
>       SYSC_sendto+0x102/0x190
>       SyS_sendto+0xe/0x10
>       do_syscall_64+0x67/0x180
>       entry_SYSCALL64_slow_path+0x25/0x25
>
>This change addresses the issue avoiding updating the bonding device
>hard_header_len when the slaves list become empty, forbidding to
>shrink it below the value used by header_ops->create().
>
>The bug is there since commit 54ef31371407 ("[PATCH] bonding: Handle large
>hard_header_len") but the panic can be triggered only since
>commit fc791b633515 ("IB/ipoib: move back IB LL address into the hard
>header").
>
>Reported-by: Norbert P <n...@physik.uzh.ch>
>Fixes: 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len")
>Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header")
>Signed-off-by: Marcelo Ricardo Leitner <marcelo.leit...@gmail.com>
>Signed-off-by: Paolo Abeni <pab...@redhat.com>

Signed-off-by: Jay Vosburgh <jay.vosbu...@canonical.com>


> drivers/net/bonding/bond_main.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 8a4ba8b..34481c9 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -1104,11 +1104,11 @@ static void bond_compute_features(struct bonding *bond)
>               gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
>               gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
>       }
>+      bond_dev->hard_header_len = max_hard_header_len;
> 
> done:
>       bond_dev->vlan_features = vlan_features;
>       bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
>-      bond_dev->hard_header_len = max_hard_header_len;
>       bond_dev->gso_max_segs = gso_max_segs;
>       netif_set_gso_max_size(bond_dev, gso_max_size);
> 
>-- 
>2.9.3
>

Reply via email to