Dear Linux folks,
The ASRock E350M1 has a Realtek ethernet controller.
It takes almost three seconds for the link to become ready. This is
noticeable after resume from suspend, where the user wants to continue
working but first has to wait for the network.
This test is done with Linux 4.10.
```
$ sudo lspci -s 3:00.0 -nn -v
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
Flags: bus master, fast devsel, latency 0, IRQ 26
I/O ports at 1000 [size=256]
Memory at f0004000 (64-bit, prefetchable) [size=4K]
Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169
```
The test below is done, removing the module, and then inserting it.
```
Apr 22 10:56:11.919311 myasrocke350m1 kernel: r8169 0000:03:00.0 eth0:
RTL8168e/8111e at 0xf82ad000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
Apr 22 10:56:11.920631 myasrocke350m1 kernel: r8169 0000:03:00.0 eth0: jumbo
features [frames: 9200 bytes, tx checksumming: ko]
Apr 22 10:56:11.967396 myasrocke350m1 kernel: r8169 0000:03:00.0 eth6: renamed
from eth0
Apr 22 10:56:12.064323 myasrocke350m1 kernel: IPv6: ADDRCONF(NETDEV_UP): eth6:
link is not ready
Apr 22 10:56:12.179106 myasrocke350m1 kernel: r8169 0000:03:00.0: firmware:
direct-loading firmware rtl_nic/rtl8168e-2.fw
Apr 22 10:56:12.247858 myasrocke350m1 kernel: r8169 0000:03:00.0 eth6: link down
Apr 22 10:56:12.248593 myasrocke350m1 kernel: IPv6: ADDRCONF(NETDEV_UP): eth6:
link is not ready
Apr 22 10:56:14.992108 myasrocke350m1 kernel: r8169 0000:03:00.0 eth6: link up
Apr 22 10:56:14.993299 myasrocke350m1 kernel: IPv6: ADDRCONF(NETDEV_CHANGE):
eth6: link becomes ready
```
Is it possible to get this well below one second?
Thanks,
Paul
signature.asc
Description: This is a digitally signed message part
