The documentation says we need to wait after turning on the PHY.
Also, don't enable WOL by default.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
--- sky2.orig/drivers/net/sky2.c 2006-07-11 15:25:40.000000000 -0700
+++ sky2/drivers/net/sky2.c 2006-07-11 15:35:31.000000000 -0700
@@ -234,7 +234,6 @@
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +242,7 @@
}
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ udelay(100);
break;
@@ -255,6 +255,7 @@
else
reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ udelay(100);
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
--
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
