On 03/09/2017 05:48 PM, Tom Lendacky wrote:
Depending on the hardware, the amd-xgbe driver may use disable_irq_nosync()
and enable_irq() when an interrupt is received to process Rx packets. If
the napi_complete_done() return value isn't checked an unbalanced enable
for the IRQ could result, generating a warning stack trace.
Update the driver to only enable interrupts if napi_complete_done() returns
true.
I've been running this for a few hours now and haven't seen the warning.
So it appears to be fixed. Thanks!
I guess Dave M picked it up already, but I will toss this in anyway.
Tested-by: Jeremy Linton <jeremy.lin...@arm.com>
Reported-by: Jeremy Linton <jeremy.lin...@arm.com>
Signed-off-by: Tom Lendacky <thomas.lenda...@amd.com>
---
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 248f60d..ffea985 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -2272,10 +2272,7 @@ static int xgbe_one_poll(struct napi_struct *napi, int
budget)
processed = xgbe_rx_poll(channel, budget);
/* If we processed everything, we are done */
- if (processed < budget) {
- /* Turn off polling */
- napi_complete_done(napi, processed);
-
+ if ((processed < budget) && napi_complete_done(napi, processed)) {
/* Enable Tx and Rx interrupts */
if (pdata->channel_irq_mode)
xgbe_enable_rx_tx_int(pdata, channel);
@@ -2317,10 +2314,7 @@ static int xgbe_all_poll(struct napi_struct *napi, int
budget)
} while ((processed < budget) && (processed != last_processed));
/* If we processed everything, we are done */
- if (processed < budget) {
- /* Turn off polling */
- napi_complete_done(napi, processed);
-
+ if ((processed < budget) && napi_complete_done(napi, processed)) {
/* Enable Tx and Rx interrupts */
xgbe_enable_rx_tx_ints(pdata);
}
