As agreed with David Miller, this patch-set is the first of 3 to enable multiple queues in stmmac.
This first one concentrates on mac operations adding functionalities as: a) Configuration through DT b) RX and TX scheduling algorithms programming b) TX queues weight programming (essential in weightes algorithms) c) RX enable as DCB or AVB (preparing for future AVB support) d) Mapping RX queue to DMA channel e) IRQ treatment prepared for multiple queues f) Debug dump prepared for multiple queues g) CBS configuration In this v3 patch-set version I included a new patch to enable CBS configuration (Patch 9). Joao Pinto (9): net: stmicro: multiple queues dt configuration net: stmicro: configure mtl rx and tx algorithms net: stmicro: configure tx queue weight net: stmicro: mtl rx queue enabled as dcb or avb net: stmicro: mapping mtl rx to dma channel net: stmicro: flow_ctrl functions adapted to mtl net: stmicro: prepare irq_status for mtl net: stmicro: mac debug prepared for multiple queues net: stmicro: configuration of CBS in case of a TX AVB queue Documentation/devicetree/bindings/net/stmmac.txt | 58 +++++- drivers/net/ethernet/stmicro/stmmac/common.h | 22 ++- .../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 +- .../net/ethernet/stmicro/stmmac/dwmac100_core.c | 3 +- drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 59 +++++- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 204 ++++++++++++++++++--- .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 7 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 140 ++++++++++++-- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 114 ++++++++++++ include/linux/stmmac.h | 36 ++++ 10 files changed, 592 insertions(+), 57 deletions(-) -- 2.9.3
