Hi all, This is not exactly new, and was sent before, although back then, I did not have an user of the pre-declared MDIO board information, but now we do. Note that I have additional changes queued up to have b53 register platform data for MIPS bcm47xx and bcm63xx.
Yes I know that we should have the Orion platforms eventually be converted to Device Tree, but until that happens, I don't want any remaining users of the old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu) and, there will be platforms out there that most likely won't never see DT coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant future). We would probably want the whole series to be merged via David Miller's tree to simplify things. Greg, can you Ack/Nack patch 5 since it touched the core LDD? Vivien, since some patches did change, I did not carry your Tested-by tag to all patches. Thanks! Changes in v4: - Changed device_find_class() to device_find_in_class_name() - Added kerneldoc above device_find_in_class_name() to explain what it does and the calling convention regarding device reference counts - Changed dev_to_net_device to device_to_net_device() added comments about what it does and the caller conventions regarding reference counts Changes in v3: - Tested EPROBE_DEFER from a mockup MDIO/DSA switch driver and everything is fine, once the driver finally probes we have access to platform data as expected - added comment above dsa_port_is_valid() that port->name is mandatory for platform data cases - added an extra check in dsa_parse_member() for a NULL pdata pointer - fixed a bunch of checkpatch errors and warnings Changes in v2: - Rebased against latest net-next/master - Moved dev_find_class() to device_find_class() into drivers/base/core.c - Moved dev_to_net_device into net/core/dev.c - Utilize dsa_chip_data directly instead of dsa_platform_data - Augmented dsa_chip_data to be multi-CPU port ready Changes from last submission (few months back): - rebased against latest net-next - do not introduce dsa2_platform_data which was overkill and was meant to allow us to do exaclty the same things with platform data and Device Tree we use the existing dsa_platform_data instead - properly register MDIO devices when the MDIO bus is registered and associate platform_data with them - add a change to the Orion platform code to demonstrate how this can be used Thank you Florian Fainelli (10): net: dsa: Pass device pointer to dsa_register_switch net: dsa: Make most functions take a dsa_port argument net: dsa: Suffix function manipulating device_node with _dn net: dsa: Move ports assignment closer to error checking drivers: base: Add device_find_in_class_name() net: dsa: Migrate to device_find_in_class_name() net: Relocate dev_to_net_device() into net/core/dev.c net: dsa: Add support for platform data net: phy: Allow pre-declaration of MDIO devices ARM: orion: Register DSA switch as a MDIO device arch/arm/mach-orion5x/common.c | 2 +- arch/arm/mach-orion5x/common.h | 4 +- arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 7 +- arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 7 +- arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 7 +- arch/arm/mach-orion5x/wnr854t-setup.c | 2 +- arch/arm/mach-orion5x/wrt350n-v2-setup.c | 7 +- arch/arm/plat-orion/common.c | 25 +++- arch/arm/plat-orion/include/plat/common.h | 4 +- drivers/base/core.c | 31 +++++ drivers/net/dsa/b53/b53_common.c | 2 +- drivers/net/dsa/mv88e6xxx/chip.c | 11 +- drivers/net/dsa/qca8k.c | 2 +- drivers/net/phy/Makefile | 3 +- drivers/net/phy/mdio-boardinfo.c | 86 +++++++++++++ drivers/net/phy/mdio-boardinfo.h | 19 +++ drivers/net/phy/mdio_bus.c | 4 + drivers/net/phy/mdio_device.c | 11 ++ include/linux/device.h | 2 + include/linux/mdio.h | 3 + include/linux/mod_devicetable.h | 1 + include/linux/netdevice.h | 2 + include/linux/phy.h | 19 +++ include/net/dsa.h | 8 +- net/core/dev.c | 30 +++++ net/dsa/dsa.c | 55 ++------- net/dsa/dsa2.c | 175 +++++++++++++++++++-------- net/dsa/dsa_priv.h | 4 +- 28 files changed, 391 insertions(+), 142 deletions(-) create mode 100644 drivers/net/phy/mdio-boardinfo.c create mode 100644 drivers/net/phy/mdio-boardinfo.h -- 2.9.3
