Hi Tariq,
On Sat, Dec 17, 2016 at 02:18:03AM -0800, Martin KaFai Lau wrote:
> Hi All,
>
> I have been debugging with XDP_TX and 16 rx-queues.
>
> 1) When 16 rx-queues is used and an XDP prog is doing XDP_TX,
> it seems that the packet cannot be XDP_TX out if the pkt
> is received from some particular CPUs (/rx-queues).
>
> 2) If 8 rx-queues is used, it does not have problem.
>
> 3) The 16 rx-queues problem also went away after reverting these
> two patches:
> 15fca2c8eb41 net/mlx4_en: Add ethtool statistics for XDP cases
> 67f8b1dcb9ee net/mlx4_en: Refactor the XDP forwarding rings scheme
>
After taking a closer look at 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP
forwarding rings scheme")
and armed with the fact that '>8 rx-queues does not work', I have
made the attached change that fixed the issue.
Making change in mlx4_en_fill_qp_context() could be an easier fix
but I think this change will be easier for discussion purpose.
I don't want to lie that I know anything about how this variable
works in CX3. If this change makes sense, I can cook up a diff.
Otherwise, can you shed some light on what could be happening
and hopefully can lead to a diff?
Thanks
--Martin
diff --git i/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
w/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index bcd955339058..b3bfb987e493 100644
--- i/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ w/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1638,10 +1638,10 @@ int mlx4_en_start_port(struct net_device *dev)
/* Configure tx cq's and rings */
for (t = 0 ; t < MLX4_EN_NUM_TX_TYPES; t++) {
- u8 num_tx_rings_p_up = t == TX ? priv->num_tx_rings_p_up : 1;
-
for (i = 0; i < priv->tx_ring_num[t]; i++) {
/* Configure cq */
+ int user_prio;
+
cq = priv->tx_cq[t][i];
err = mlx4_en_activate_cq(priv, cq, i);
if (err) {
@@ -1660,9 +1660,14 @@ int mlx4_en_start_port(struct net_device *dev)
/* Configure ring */
tx_ring = priv->tx_ring[t][i];
+ if (t != TX_XDP)
+ user_prio = i / priv->num_tx_rings_p_up;
+ else
+ user_prio = i & 0x07;
+
err = mlx4_en_activate_tx_ring(priv, tx_ring,
cq->mcq.cqn,
- i / num_tx_rings_p_up);
+ user_prio);
if (err) {
en_err(priv, "Failed allocating Tx ring\n");
mlx4_en_deactivate_cq(priv, cq);
