[PATCH] net: phy: micrel: fix KSZ8041FTL supported value

[Kirill Esipov]

Fix setting of SUPPORTED_FIBRE bit as it was not present in features
of KSZ8041.

Signed-off-by: Kirill Esipov <yesi...@gmail.com>
---
 drivers/net/phy/micrel.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 081df68..ea92d52 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -318,12 +318,12 @@ static int ksz8041_config_init(struct phy_device *phydev)
        /* Limit supported and advertised modes in fiber mode */
        if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
                phydev->dev_flags |= MICREL_PHY_FXEN;
-               phydev->supported &= SUPPORTED_FIBRE |
-                                    SUPPORTED_100baseT_Full |
+               phydev->supported &= SUPPORTED_100baseT_Full |
                                     SUPPORTED_100baseT_Half;
-               phydev->advertising &= ADVERTISED_FIBRE |
-                                      ADVERTISED_100baseT_Full |
+               phydev->supported |= SUPPORTED_FIBRE;
+               phydev->advertising &= ADVERTISED_100baseT_Full |
                                       ADVERTISED_100baseT_Half;
+               phydev->advertising |= ADVERTISED_FIBRE;
                phydev->autoneg = AUTONEG_DISABLE;
        }
 
-- 
2.7.4