This is a follow-up on the patch series posted at Fri, 4 Nov 2016 11:27:31 +0100
(old cover letter included below).
The following is changed/added/addressed:
- Syntax is changed from "--set-phy-tunable downshift on|off|%d" to
"--set-phy-tunable [downshift on|off [count N]]" - as requested by Andrew.
- Short description of downshifting is added to the man page.
Please review
Best regards
Allan and Raju
Raju Lakkaraju (2):
ethtool-copy.h:sync with net
Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY
downshift
ethtool-copy.h | 18 +++++++-
ethtool.8.in | 39 ++++++++++++++++
ethtool.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 200 insertions(+), 1 deletion(-)
Old cover letter:
> From 5d926ca56f13e283aaa98e820d4720305be4da8f Mon Sep 17 00:00:00 2001
> From: "Allan W. Nielsen" <allan.niel...@microsemi.com>
> Date: Fri, 4 Nov 2016 11:27:31 +0100
> Subject: [PATCH ethtool 0/2] Adding downshift support to ethtool
>
> Hi All,
>
> This patch implements for set/get downshifting.
>
> Downshifting can either be turned on/off, or it can be configured to a
> specifc count.
>
> If no "count" are provided, then it is up to the individual PHY driver to
> configure a default count.
--
2.7.3
