From: Vivien Didelot <vivien.dide...@savoirfairelinux.com> Date: Fri, 4 Nov 2016 03:23:25 +0100
> The Marvell chips have one internal SMI device per port, containing a > set of registers used to configure a port's link, STP state, default > VLAN or addresses database, etc. > > This patchset creates port files to implement the port operations as > described in datasheets, and extend the chip ops structure with them. > > Patches 1 to 6 implement accessors for port's STP state, port based VLAN > map, default FID, default VID, and 802.1Q mode. > > Patches 7 to 11 implement the port's MAC setup of link state, duplex > mode, RGMII delay and speed, all accessed through port's register 0x01. > > The new port's MAC setup code is used to re-implement the adjust_link > code and correctly force the link down before changing any of the MAC > settings, as requested by the datasheets. > > The port's MAC accessors use values compatible with struct phy_device > (e.g. DUPLEX_FULL) and extend them when needed (e.g. SPEED_MAX). > > Changes in v2: > > - Strictly use new _UNFORCED values instead of re-using _UNKNOWN ones. Series applied, thanks Vivien.
