On Tuesday 04 October 2016 06:26 PM, Mugunthan V N wrote:
> The default impedance settings of the phy is not the optimal
> value, due to this the second ethernet is not working. Fix it
> with correct values which makes the second ethernet port to work.
>
> Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
> ---
> arch/arm/boot/dts/dra72-evm-revc.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts
> b/arch/arm/boot/dts/dra72-evm-revc.dts
> index f9cfd3b..d626cd7 100644
> --- a/arch/arm/boot/dts/dra72-evm-revc.dts
> +++ b/arch/arm/boot/dts/dra72-evm-revc.dts
> @@ -62,6 +62,7 @@
> ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + ti,min-output-imepdance;
s/imepdance/impedance
> };
>
> dp83867_1: ethernet-phy@3 {
> @@ -69,5 +70,6 @@
> ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
> ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + ti,min-output-imepdance;
same here.
Thanks and regards,
Lokesh
> };
> };
>
