On Sat, 27 May 2006 13:39:19 +0200
Francois Romieu <[EMAIL PROTECTED]> wrote:
> Jeff Garzik <[EMAIL PROTECTED]> :
> [...]
> > applied
>
> $ grep 8129 drivers/net/*.[ch]
> [...]
> drivers/net/8139too.c: {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> RTL8139 }
>
> Not a big issue but I would be really surprized that it does trigger
> a few PR.
me too, but it is true.
I have checked 2 chips of RTL8110SBL.
These chips work without any problem by the r8169 driver.
Yoichi
lspci result:
0000:01:02.0 0200: 10ec:8129 (rev 10)
Subsystem: 11ec:8129
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 8000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at 1000000 [size=256]
Region 1: Memory at 11b00000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 11c00000 [disabled] [size=32K]
Capabilities: [dc] Power Management version 6
Flags: PMEClk+ DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
0000:01:03.0 0200: 10ec:8129 (rev 10)
Subsystem: 11ec:8129
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 128 (8000ns min, 8000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 53
Region 0: I/O ports at 1000400 [size=256]
Region 1: Memory at 11b00100 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 11c08000 [disabled] [size=8K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk+ DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
