early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Linux version 4.8.0-rc2-00241-g68263dd (kbuild@lkp-ib03) (gcc version 6.1.1 20160705 (Debian 6.1.1-9) ) #1 PREEMPT Thu Sep 15 05:41:20 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffe0000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xffe0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [800f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x0c7fffff]
[    0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[    0.000000] BRK [0x0c3c0000, 0x0c3c0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0fcfe000-0x0ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000000FFE1737 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000000FFE1613 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000000FFE0040 0015D3 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000000FFE0000 000040
[    0.000000] ACPI: APIC 0x000000000FFE1687 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000000FFE16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 255MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0ffe0000
[    0.000000]   low ram: 0 - 0ffe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:fcfd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 4928782156 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] BRK [0x0c3c1000, 0x0c3c1fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000ffdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffdffff]
[    0.000000] On node 0 totalpages: 65406
[    0.000000] free_area_init_node: node 0, pgdat 8b45b1c0, node_mem_map 8fabd024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 540 pages used for memmap
[    0.000000]   Normal zone: 61408 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr b31e340
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64830
[    0.000000] Kernel command line: ip=::::vm-lkp-st01-openwrt-ia32-6::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml ARCH=i386 kconfig=i386-randconfig-h1-09141703 branch=linux-devel/devel-hourly-2016091414 commit=68263ddb4777cc996868498e3d56f616851966d2 BOOT_IMAGE=/pkg/linux/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/vmlinuz-4.8.0-rc2-00241-g68263dd max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=n
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 217360K/261624K available (13713K kernel code, 1973K rwdata, 7796K rodata, 1044K init, 13908K bss, 44264K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0x907e0000 - 0xff7fe000   (1776 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x8ffe0000   ( 255 MB)
[    0.000000]       .init : 0x8b4f3000 - 0x8b5f8000   (1044 kB)
[    0.000000]       .data : 0x8ab64917 - 0x8b4f16c0   (9779 kB)
[    0.000000]       .text : 0x89e00000 - 0x8ab64917   (13714 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=8f5e0000 soft=8f5e2000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4895 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]   | Wound/wait tests |
[    0.000000]   ---------------------
[    0.000000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.000000]                ww contexts mixing:failed|  ok  |
[    0.000000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.000000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.000000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]            spinlock nest unlocked:  ok  |
[    0.000000]   -----------------------------------------------------
[    0.000000]                                  |block | try  |context|
[    0.000000]   -----------------------------------------------------
[    0.000000]                           context:failed|  ok  |  ok  |
[    0.000000]                               try:failed|  ok  |failed|
[    0.000000]                             block:failed|  ok  |failed|
[    0.000000]                          spinlock:failed|  ok  |failed|
[    0.000000] --------------------------------------------------------
[    0.000000] 141 out of 253 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration deviates from HPET: 2343525 2659685
[    0.000000] tsc: Using PIT calibration value
[    0.000000] tsc: Detected 2660.006 MHz processor
[    0.615424] Calibrating delay loop (skipped) preset value.. 5320.01 BogoMIPS (lpj=2660006)
[    0.616943] pid_max: default: 32768 minimum: 301
[    0.617914] ACPI: Core revision 20160422
[    0.623828] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.633100] 
[    0.644854] Security Framework initialized
[    0.645894] Smack:  Initializing.
[    0.646742] AppArmor: AppArmor disabled by boot time parameter
[    0.648128] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.649635] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.654863] mce: CPU supports 10 MCE banks
[    0.656063] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.670347] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.671860] CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.684856] ftrace: allocating 59336 entries in 116 pages
[    0.949247] Performance Events: PMU not available due to virtualization, using software events only.
[    0.974104] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.980246] enabled ExtINT on CPU#0
[    0.991321] ENABLING IO-APIC IRQs
[    0.991921] init IO_APIC IRQs
[    0.992480]  apic 0 pin 0 not connected
[    0.993172] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.994592] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.995976] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.997390] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    1.007924] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    1.009472] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    1.010981] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    1.012462] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    1.013848] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    1.015245] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    1.025721] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    1.027210] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    1.028744] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    1.030160] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    1.031623] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    1.033033]  apic 0 pin 16 not connected
[    1.033736]  apic 0 pin 17 not connected
[    1.043429]  apic 0 pin 18 not connected
[    1.044118]  apic 0 pin 19 not connected
[    1.044823]  apic 0 pin 20 not connected
[    1.045531]  apic 0 pin 21 not connected
[    1.046216]  apic 0 pin 22 not connected
[    1.046919]  apic 0 pin 23 not connected
[    1.047789] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.048844] Using local APIC timer interrupts.
[    1.048844] calibrating APIC timer ...
[    1.231322] ... lapic delta = 11188086
[    1.231971] ... PM-Timer delta = 640772
[    1.232644] APIC calibration not consistent with PM-Timer: 179ms instead of 100ms
[    1.233925] APIC delta adjusted to PM-Timer: 6249992 (11188086)
[    1.234943] TSC delta adjusted to PM-Timer: 266000438 (476166304)
[    1.235983] ..... delta 6249992
[    1.236550] ..... mult: 268435112
[    1.237114] ..... calibration result: 999998
[    1.237867] ..... CPU clock speed is 2660.0004 MHz.
[    1.238721] ..... host bus clock speed is 999.0998 MHz.
[    1.240224] devtmpfs: initialized
[    1.245936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    1.247686] prandom: seed boundary self test passed
[    1.249120] prandom: 100 self tests passed
[    1.249863] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    1.252307] NET: Registered protocol family 16
[    1.258291] cpuidle: using governor menu
[    1.261533] ACPI: bus type PCI registered
[    1.262447] PCI: Using configuration type 1 for base access
[    1.331709] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.333110] gpio-f7188x: Not a Fintek device at 0x0000002e
[    1.334090] gpio-f7188x: Not a Fintek device at 0x0000004e
[    1.335752] ACPI: Added _OSI(Module Device)
[    1.336657] ACPI: Added _OSI(Processor Device)
[    1.337435] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.338225] ACPI: Added _OSI(Processor Aggregator Device)
[    1.342983] ACPI: Interpreter enabled
[    1.343667] ACPI: (supports S0 S3 S5)
[    1.353360] ACPI: Using IOAPIC for interrupt routing
[    1.354339] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.383593] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.384665] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    1.385657] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.386796] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    1.402050] PCI host bridge to bus 0000:00
[    1.402773] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.416938] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.418100] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.419378] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
[    1.420644] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.421678] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.423683] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.425851] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.431141] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    1.434357] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.435576] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.436678] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.451575] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.453324] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.454950] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.456182] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.458082] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.477448] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.482334] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.492177] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.494163] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.496680] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.513011] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.536431] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.539533] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    1.541419] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    1.559354] pci_bus 0000:00: on NUMA node 0
[    1.561503] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.562855] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.564303] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.565686] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.566910] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.581576] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.587808] media: Linux media interface: v0.10
[    1.588683] Linux video capture interface: v2.00
[    1.589575] pps_core: LinuxPPS API ver. 1 registered
[    1.590428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.591995] PTP clock support registered
[    1.593090] wmi: Mapper loaded
[    1.607078] FPGA manager framework
[    1.607746] PCI: Using ACPI for IRQ routing
[    1.608479] PCI: pci_cache_line_size set to 64 bytes
[    1.609533] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.610649] e820: reserve RAM buffer [mem 0x0ffe0000-0x0fffffff]
[    1.612641] NET: Registered protocol family 8
[    1.614983] NET: Registered protocol family 20
[    1.616462] NetLabel: Initializing
[    1.617073] NetLabel:  domain hash size = 128
[    1.617844] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.618893] NetLabel:  unlabeled traffic allowed by default
[    1.619862] nfc: nfc_init: NFC Core ver 0.1
[    1.620681] NET: Registered protocol family 39
[    1.623656] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.624926] clocksource: Switched to clocksource kvm-clock
[    1.639836] Warning: could not register annotated branches stats
[    1.788801] VFS: Disk quotas dquot_6.6.0
[    1.789580] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.791062] pnp: PnP ACPI init
[    1.791903] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.793230] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.794518] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.795692] pnp 00:03: [dma 2]
[    1.796374] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.797720] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.799065] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.800420] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.802169] pnp: PnP ACPI: found 7 devices
[    1.839325] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.841051] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.842110] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.843150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.844321] pci_bus 0000:00: resource 7 [mem 0x10000000-0xfebfffff window]
[    1.845578] NET: Registered protocol family 2
[    1.846929] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.848129] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    1.849306] TCP: Hash tables configured (established 2048 bind 2048)
[    1.850550] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.851605] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.852889] NET: Registered protocol family 1
[    1.853673] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.854701] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.855709] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.856826] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.858282] PCI: CLS 0 bytes, default 64
[    1.859866] Unpacking initramfs...
[    3.135971] Freeing initrd memory: 2952K (8fcfe000 - 8ffe0000)
[    3.139286] Machine check injector initialized
[    3.140730] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    3.141881] apm: overridden by ACPI.
[    3.143817] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    3.146782] spin_lock-torture: Creating torture_shuffle task
[    3.147843] spin_lock-torture: Creating torture_stutter task
[    3.148858] spin_lock-torture: torture_shuffle task started
[    3.149838] spin_lock-torture: Creating lock_torture_writer task
[    3.150917] spin_lock-torture: torture_stutter task started
[    3.151893] spin_lock-torture: Creating lock_torture_writer task
[    3.152969] spin_lock-torture: lock_torture_writer task started
[    3.154015] spin_lock-torture: Creating lock_torture_stats task
[    3.155066] spin_lock-torture: lock_torture_writer task started
[    3.157273] torture_init_begin: Refusing rcu init: spin_lock running.
[    3.158425] torture_init_begin: One torture test at a time!
[    3.160473] futex hash table entries: 256 (order: 1, 11264 bytes)
[    3.161543] spin_lock-torture: lock_torture_stats task started
[    3.162600] audit: initializing netlink subsys (disabled)
[    3.163641] audit: type=2000 audit(1473889486.674:1): initialized
[    3.166342] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    3.168405] DLM installed
[    3.170360] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    3.171378] fuse init (API version 7.25)
[    3.172230] orangefs_init: called with debug mask: :none: :0:
[    3.173574] orangefs: module version upstream loaded
[    3.183754] NET: Registered protocol family 38
[    3.184576] start plist test
[    3.193659] end plist test
[    3.204106] test_hash: __hash_32() has no arch implementation to test.
[    3.205246] test_hash: hash_32() has no arch implementation to test.
[    3.206357] test_hash: hash_64() has no arch implementation to test.
[    3.207438] test_hash: 33152 tests passed.
[    3.208206] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    3.209294] Test 00:
[    3.214888]   Adding 50000 keys
[    3.272922]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.309994]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.311451]   Deleting 50000 keys
[    3.338301]   Duration of test: 122788755 ns
[    3.339077] Test 01:
[    3.342778]   Adding 50000 keys
[    3.395134]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.425121]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.426553]   Deleting 50000 keys
[    3.453453]   Duration of test: 110064940 ns
[    3.454224] Test 02:
[    3.458597]   Adding 50000 keys
[    3.509803]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.542345]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.543789]   Deleting 50000 keys
[    3.569659]   Duration of test: 110475267 ns
[    3.570477] Test 03:
[    3.574748]   Adding 50000 keys
[    3.628616]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.658816]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.660265]   Deleting 50000 keys
[    3.687163]   Duration of test: 111778163 ns
[    3.687960] Average test time: 113776781
[    3.689252] Testing concurrent rhashtable access from 10 threads
[    4.509996] tsc: Refined TSC clocksource calibration: 2660.000 MHz
[    4.525249] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657a4005d1, max_idle_ns: 440795292677 ns
[    7.211396] Started 10 threads, 0 failed
[    7.244849] test_printf: all 260 tests passed
[    7.396290] test_bitmap: all 460506 tests passed
[    7.397143] test_uuid: all 18 tests passed
[    7.418568] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    7.419443] crc32: self tests passed, processed 225944 bytes in 16256093 nsec
[    7.424612] crc32c: CRC_LE_BITS = 1
[    7.425273] crc32c: self tests passed, processed 225944 bytes in 1933235 nsec
[    7.705002] crc32_combine: 8373 self tests passed
[    7.952543] crc32c_combine: 8373 self tests passed
[    7.954548] gpio_it87: no device
[    7.958464] no IO addresses supplied
[    7.960407] uvesafb: failed to execute /sbin/v86d
[    7.961242] uvesafb: make sure that the v86d helper is installed and executable
[    7.962526] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    7.963679] uvesafb: vbe_init() failed with -22
[    7.964539] uvesafb: probe of uvesafb.0 failed with error -22
[    7.965610] ipmi message handler version 39.2
[    7.966405] ipmi device interface
[    7.967095] IPMI System Interface driver.
[    7.967942] ipmi_si: Unable to find any System Interface(s)
[    7.968911] IPMI Watchdog: driver initialized
[    7.969681] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    7.971433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    7.973218] ACPI: Power Button [PWRF]
[    7.974272] Warning: Processor Platform Limit event detected, but not handled.
[    7.975644] Consider compiling CPUfreq support into your kernel.
[    8.057683] HDLC line discipline maxframe=4096
[    8.058501] N_HDLC line discipline registered.
[    8.059334] r3964: Philips r3964 Driver $Revision: 1.10 $
[    8.060277] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    8.061516] serial 00:05: GPIO lookup for consumer cts
[    8.062412] serial 00:05: using ACPI for GPIO lookup
[    8.063299] acpi PNP0501:00: GPIO: looking up cts-gpios
[    8.064197] acpi PNP0501:00: GPIO: looking up cts-gpio
[    8.065073] acpi PNP0501:00: GPIO: looking up 0 in _CRS
[    8.065995] serial 00:05: using lookup tables for GPIO lookup
[    8.066987] serial 00:05: lookup for GPIO cts failed
[    8.083208] serial 00:05: GPIO lookup for consumer dsr
[    8.084081] serial 00:05: using ACPI for GPIO lookup
[    8.084944] acpi PNP0501:00: GPIO: looking up dsr-gpios
[    8.085840] acpi PNP0501:00: GPIO: looking up dsr-gpio
[    8.086721] serial 00:05: using lookup tables for GPIO lookup
[    8.087712] serial 00:05: lookup for GPIO dsr failed
[    8.088589] serial 00:05: GPIO lookup for consumer dcd
[    8.089480] serial 00:05: using ACPI for GPIO lookup
[    8.090334] acpi PNP0501:00: GPIO: looking up dcd-gpios
[    8.091243] acpi PNP0501:00: GPIO: looking up dcd-gpio
[    8.092108] serial 00:05: using lookup tables for GPIO lookup
[    8.093100] serial 00:05: lookup for GPIO dcd failed
[    8.106149] serial 00:05: GPIO lookup for consumer rng
[    8.107027] serial 00:05: using ACPI for GPIO lookup
[    8.107882] acpi PNP0501:00: GPIO: looking up rng-gpios
[    8.108784] acpi PNP0501:00: GPIO: looking up rng-gpio
[    8.109670] serial 00:05: using lookup tables for GPIO lookup
[    8.110656] serial 00:05: lookup for GPIO rng failed
[    8.111514] serial 00:05: GPIO lookup for consumer rts
[    8.112398] serial 00:05: using ACPI for GPIO lookup
[    8.113253] acpi PNP0501:00: GPIO: looking up rts-gpios
[    8.114129] acpi PNP0501:00: GPIO: looking up rts-gpio
[    8.115014] serial 00:05: using lookup tables for GPIO lookup
[    8.115987] serial 00:05: lookup for GPIO rts failed
[    8.116847] serial 00:05: GPIO lookup for consumer dtr
[    8.117740] serial 00:05: using ACPI for GPIO lookup
[    8.130779] acpi PNP0501:00: GPIO: looking up dtr-gpios
[    8.131685] acpi PNP0501:00: GPIO: looking up dtr-gpio
[    8.132567] serial 00:05: using lookup tables for GPIO lookup
[    8.133544] serial 00:05: lookup for GPIO dtr failed
[    8.192201] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.193940] serial 00:06: GPIO lookup for consumer cts
[    8.194837] serial 00:06: using ACPI for GPIO lookup
[    8.195697] acpi PNP0501:01: GPIO: looking up cts-gpios
[    8.196598] acpi PNP0501:01: GPIO: looking up cts-gpio
[    8.197490] acpi PNP0501:01: GPIO: looking up 0 in _CRS
[    8.198415] serial 00:06: using lookup tables for GPIO lookup
[    8.199405] serial 00:06: lookup for GPIO cts failed
[    8.200264] serial 00:06: GPIO lookup for consumer dsr
[    8.201131] serial 00:06: using ACPI for GPIO lookup
[    8.202006] acpi PNP0501:01: GPIO: looking up dsr-gpios
[    8.202889] acpi PNP0501:01: GPIO: looking up dsr-gpio
[    8.215885] serial 00:06: using lookup tables for GPIO lookup
[    8.216876] serial 00:06: lookup for GPIO dsr failed
[    8.217759] serial 00:06: GPIO lookup for consumer dcd
[    8.218653] serial 00:06: using ACPI for GPIO lookup
[    8.219661] acpi PNP0501:01: GPIO: looking up dcd-gpios
[    8.220572] acpi PNP0501:01: GPIO: looking up dcd-gpio
[    8.221457] serial 00:06: using lookup tables for GPIO lookup
[    8.222441] serial 00:06: lookup for GPIO dcd failed
[    8.223303] serial 00:06: GPIO lookup for consumer rng
[    8.224166] serial 00:06: using ACPI for GPIO lookup
[    8.225017] acpi PNP0501:01: GPIO: looking up rng-gpios
[    8.225899] acpi PNP0501:01: GPIO: looking up rng-gpio
[    8.226782] serial 00:06: using lookup tables for GPIO lookup
[    8.227766] serial 00:06: lookup for GPIO rng failed
[    8.242208] serial 00:06: GPIO lookup for consumer rts
[    8.243083] serial 00:06: using ACPI for GPIO lookup
[    8.243950] acpi PNP0501:01: GPIO: looking up rts-gpios
[    8.244839] acpi PNP0501:01: GPIO: looking up rts-gpio
[    8.245733] serial 00:06: using lookup tables for GPIO lookup
[    8.246732] serial 00:06: lookup for GPIO rts failed
[    8.247602] serial 00:06: GPIO lookup for consumer dtr
[    8.248491] serial 00:06: using ACPI for GPIO lookup
[    8.249356] acpi PNP0501:01: GPIO: looking up dtr-gpios
[    8.250268] acpi PNP0501:01: GPIO: looking up dtr-gpio
[    8.251134] serial 00:06: using lookup tables for GPIO lookup
[    8.252136] serial 00:06: lookup for GPIO dtr failed
[    8.314202] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    8.318033] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.319145] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.320341] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.321377] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.322468] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.323623] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.324650] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.338809] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.339977] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.341000] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.342063] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.343266] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.344293] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.345346] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.346505] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.347535] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.348630] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.349802] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.365668] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.366788] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.367953] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.368964] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.370022] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.371157] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.372201] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.373257] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.374407] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.375435] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.376530] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.377717] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.381457] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.382517] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.383669] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.384686] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.385737] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.386887] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.388683] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.389764] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.390931] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.391998] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.393096] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.408206] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.409238] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.410338] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.411511] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.412554] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.413725] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.415233] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.416290] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.417367] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.431750] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.432783] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.433833] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.435001] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.436792] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.437865] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.439294] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.440391] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.441463] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.442610] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.443648] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.444725] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.445865] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.446887] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.448192] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.449331] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.450358] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.451415] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.452567] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.453574] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.454631] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.455768] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.457536] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.458628] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.459825] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.461202] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.462468] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.463846] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.464891] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.467204] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.468392] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.469431] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.470484] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.471646] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.472676] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.473714] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.474851] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.475879] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.476931] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.478107] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.480720] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.482131] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.483320] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.484351] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.485398] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.486578] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.487631] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.488678] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.490164] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.491329] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.492380] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.493521] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.494510] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.495554] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.496696] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.497716] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.498763] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.499923] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.501704] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.502798] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.503965] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.504973] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.506037] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.507196] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.508233] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.509490] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.510731] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.511863] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.512951] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.514094] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.515100] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.516142] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.517289] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.518308] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.519666] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.520956] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.522751] serial8250 serial8250.3: GPIO lookup for consumer cts
[    8.523824] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.524989] serial8250 serial8250.3: lookup for GPIO cts failed
[    8.526018] serial8250 serial8250.3: GPIO lookup for consumer dsr
[    8.527090] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.528248] serial8250 serial8250.3: lookup for GPIO dsr failed
[    8.529480] serial8250 serial8250.3: GPIO lookup for consumer dcd
[    8.530567] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.531758] serial8250 serial8250.3: lookup for GPIO dcd failed
[    8.532936] serial8250 serial8250.3: GPIO lookup for consumer rng
[    8.534086] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.535331] serial8250 serial8250.3: lookup for GPIO rng failed
[    8.536406] serial8250 serial8250.3: GPIO lookup for consumer rts
[    8.537503] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.538671] serial8250 serial8250.3: lookup for GPIO rts failed
[    8.539692] serial8250 serial8250.3: GPIO lookup for consumer dtr
[    8.540730] serial8250 serial8250.3: using lookup tables for GPIO lookup
[    8.541869] serial8250 serial8250.3: lookup for GPIO dtr failed
[    8.544348] serial8250 serial8250.4: GPIO lookup for consumer cts
[    8.545442] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.546626] serial8250 serial8250.4: lookup for GPIO cts failed
[    8.547649] serial8250 serial8250.4: GPIO lookup for consumer dsr
[    8.548688] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.549822] serial8250 serial8250.4: lookup for GPIO dsr failed
[    8.550838] serial8250 serial8250.4: GPIO lookup for consumer dcd
[    8.551882] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.553016] serial8250 serial8250.4: lookup for GPIO dcd failed
[    8.554054] serial8250 serial8250.4: GPIO lookup for consumer rng
[    8.555162] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.556611] serial8250 serial8250.4: lookup for GPIO rng failed
[    8.557940] serial8250 serial8250.4: GPIO lookup for consumer rts
[    8.559338] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.560536] serial8250 serial8250.4: lookup for GPIO rts failed
[    8.561578] serial8250 serial8250.4: GPIO lookup for consumer dtr
[    8.562622] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.564197] serial8250 serial8250.4: lookup for GPIO dtr failed
[    8.565999] serial8250 serial8250.4: GPIO lookup for consumer cts
[    8.567079] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.568238] serial8250 serial8250.4: lookup for GPIO cts failed
[    8.569257] serial8250 serial8250.4: GPIO lookup for consumer dsr
[    8.570302] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.571446] serial8250 serial8250.4: lookup for GPIO dsr failed
[    8.572463] serial8250 serial8250.4: GPIO lookup for consumer dcd
[    8.573504] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.574642] serial8250 serial8250.4: lookup for GPIO dcd failed
[    8.575657] serial8250 serial8250.4: GPIO lookup for consumer rng
[    8.576694] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.577832] serial8250 serial8250.4: lookup for GPIO rng failed
[    8.578872] serial8250 serial8250.4: GPIO lookup for consumer rts
[    8.579940] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.581085] serial8250 serial8250.4: lookup for GPIO rts failed
[    8.582081] serial8250 serial8250.4: GPIO lookup for consumer dtr
[    8.583129] serial8250 serial8250.4: using lookup tables for GPIO lookup
[    8.584281] serial8250 serial8250.4: lookup for GPIO dtr failed
[    8.586143] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.587234] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.588384] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.589463] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.590667] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.592211] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.593236] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.594278] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.595422] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.596440] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.597490] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.598633] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.599649] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.600690] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.601825] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.602836] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.603883] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.605029] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.606782] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.607995] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.609541] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.610930] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.612002] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.613134] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.614156] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.615209] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.617192] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.618219] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.619264] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.620434] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.621449] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.622486] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.623636] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.624667] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.625721] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.626872] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.628663] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.629747] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.630953] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.632106] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.633260] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.634416] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.635458] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.636632] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.637887] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.638907] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.639977] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.641107] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.642119] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.643162] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.644307] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.645319] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.646360] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.647520] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.649272] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.650339] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.651507] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.652535] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.653593] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.654744] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.655765] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.656817] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.657968] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.658972] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.660035] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.661225] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.662243] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.663284] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.664434] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.665450] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.666491] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.667634] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.669366] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.670431] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.671581] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.673197] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.674243] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.675396] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.676435] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.677511] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.678687] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.679721] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.680791] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.681948] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.682952] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.684016] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.685159] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.686196] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.687243] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.688409] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.690146] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.691219] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.692370] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.693431] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.694560] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.695708] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.696723] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.697761] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.698901] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.699919] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.700966] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.702090] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.703124] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.704210] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.705400] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.706460] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.721203] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.722396] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.724304] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.725428] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.726610] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.727647] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.728709] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.729872] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.730914] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.732083] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.746388] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.747440] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.748493] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.749648] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.750688] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.751745] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.752900] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.755196] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.756253] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.757402] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.772302] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.773407] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.774586] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.775609] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.776666] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.777839] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.778879] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.779967] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.781111] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.782212] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.783254] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.785194] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.786256] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.787339] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.788609] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.789661] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.790755] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.791946] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.793740] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.815942] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.817130] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.818155] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.819435] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.820706] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.821797] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.822883] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.824062] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.825079] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.826215] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.841202] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.842261] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.843332] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.844492] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.845538] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.846613] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.847818] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.849625] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.850829] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.852050] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.866209] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.867316] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.868548] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.869610] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.870686] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.872037] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.873123] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.874305] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.875523] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.876559] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.877628] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.892204] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.893283] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.894363] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.895542] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.897442] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.898598] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.899834] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.900927] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.902012] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.904215] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.905324] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.906385] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.907566] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.908640] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.909749] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.912218] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.913293] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.914377] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.915600] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.916694] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.917754] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.918946] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.920740] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.921846] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.926939] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.928033] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.929126] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.930346] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.931399] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.932448] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.933611] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.934647] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.935712] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.937018] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.938048] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.939184] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.940443] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.941473] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.942525] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.943807] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.945676] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.946799] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.948096] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.949158] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.950318] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.951524] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.952592] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.953709] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.954946] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.956025] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.957232] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.958510] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.959543] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.960611] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.961789] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.962821] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.964016] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.966753] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.968631] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.969708] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.970894] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.971922] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.974201] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.975497] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.976644] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.977781] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.978958] serial8250 serial8250.5: lookup for GPIO dcd failed
[    8.979970] serial8250 serial8250.5: GPIO lookup for consumer rng
[    8.981052] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.982252] serial8250 serial8250.5: lookup for GPIO rng failed
[    8.983323] serial8250 serial8250.5: GPIO lookup for consumer rts
[    8.984418] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.985615] serial8250 serial8250.5: lookup for GPIO rts failed
[    8.986653] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    8.987735] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.989035] serial8250 serial8250.5: lookup for GPIO dtr failed
[    8.990992] serial8250 serial8250.5: GPIO lookup for consumer cts
[    8.992111] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.993294] serial8250 serial8250.5: lookup for GPIO cts failed
[    8.994324] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    8.995363] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    8.996510] serial8250 serial8250.5: lookup for GPIO dsr failed
[    8.998192] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    8.999331] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.000566] serial8250 serial8250.5: lookup for GPIO dcd failed
[    9.001599] serial8250 serial8250.5: GPIO lookup for consumer rng
[    9.002666] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.003809] serial8250 serial8250.5: lookup for GPIO rng failed
[    9.004823] serial8250 serial8250.5: GPIO lookup for consumer rts
[    9.005873] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.007030] serial8250 serial8250.5: lookup for GPIO rts failed
[    9.008063] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    9.009128] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.010515] serial8250 serial8250.5: lookup for GPIO dtr failed
[    9.012340] serial8250 serial8250.5: GPIO lookup for consumer cts
[    9.013453] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.014639] serial8250 serial8250.5: lookup for GPIO cts failed
[    9.015772] serial8250 serial8250.5: GPIO lookup for consumer dsr
[    9.016996] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.018150] serial8250 serial8250.5: lookup for GPIO dsr failed
[    9.019215] serial8250 serial8250.5: GPIO lookup for consumer dcd
[    9.020274] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.021444] serial8250 serial8250.5: lookup for GPIO dcd failed
[    9.022465] serial8250 serial8250.5: GPIO lookup for consumer rng
[    9.023512] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.024700] serial8250 serial8250.5: lookup for GPIO rng failed
[    9.025864] serial8250 serial8250.5: GPIO lookup for consumer rts
[    9.027033] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.028291] serial8250 serial8250.5: lookup for GPIO rts failed
[    9.029326] serial8250 serial8250.5: GPIO lookup for consumer dtr
[    9.030380] serial8250 serial8250.5: using lookup tables for GPIO lookup
[    9.031529] serial8250 serial8250.5: lookup for GPIO dtr failed
[    9.033479] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.034562] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.039222] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.041203] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.042274] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.043476] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.049196] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.050274] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.054190] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.055213] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.056262] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.061215] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.062301] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.063365] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.069217] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.070328] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.071404] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.076190] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.078286] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.081192] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.082340] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.083354] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.089208] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.090457] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.091488] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.096196] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.097412] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.098473] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.099545] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.100686] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.105194] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.106245] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.107383] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.111190] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.112240] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.116005] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.117912] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.119040] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.120239] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.121282] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.122328] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.123520] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.124575] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.125635] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.126796] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.127831] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.128922] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.130098] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.131099] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.132142] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.133310] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.134327] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.135372] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.136510] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.138290] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.139351] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.140505] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.141524] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.142580] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.143748] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.144782] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.145848] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.147020] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.148051] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.149105] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.150291] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.151321] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.152392] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.153554] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.154603] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.156195] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.157343] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.159140] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.161207] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.162369] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.163383] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.164429] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.165626] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.166761] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.167926] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.169139] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.170200] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.173618] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.174889] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.175956] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.176985] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.178135] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.179280] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.180443] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.181675] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.183444] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.184543] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.185844] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.187018] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.188084] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.189247] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.190294] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.192190] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.193351] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.194403] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.195477] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.196636] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.197651] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.198696] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.199939] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.201074] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.207301] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.208598] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.210505] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.211610] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.212822] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.213882] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.216211] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.217436] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.231660] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.232842] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.234128] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.235289] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.236470] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.237687] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.238751] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.239818] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.240973] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.241989] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.243078] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.258201] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.260052] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.261170] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.262343] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.263393] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.264450] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.265645] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.266696] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.267783] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.268984] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.270007] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.284173] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.285335] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.286364] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.287426] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.288596] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.289681] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.290774] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.291981] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.293838] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.294937] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.309276] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.310358] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.311438] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.312608] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.313717] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.314804] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.315983] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.317007] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.318077] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.319259] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.320312] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.321391] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.323188] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.324265] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.325344] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.339644] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.341532] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.342635] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.343841] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.344919] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.346007] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.347216] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.348268] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.349351] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.350523] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.351577] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.366191] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.367362] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.368400] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.369494] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.370669] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.371724] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.372807] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.374003] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.375847] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.376951] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.392209] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.393292] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.394368] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.395590] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.396624] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.397691] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.398865] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.399936] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.401032] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.402222] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.403279] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.404371] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.405534] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.406596] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.407655] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.408801] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.410634] serial8250 serial8250.7: GPIO lookup for consumer cts
[    9.411714] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.412862] serial8250 serial8250.7: lookup for GPIO cts failed
[    9.413902] serial8250 serial8250.7: GPIO lookup for consumer dsr
[    9.414964] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.416100] serial8250 serial8250.7: lookup for GPIO dsr failed
[    9.417134] serial8250 serial8250.7: GPIO lookup for consumer dcd
[    9.418191] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.419375] serial8250 serial8250.7: lookup for GPIO dcd failed
[    9.420398] serial8250 serial8250.7: GPIO lookup for consumer rng
[    9.421460] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.422632] serial8250 serial8250.7: lookup for GPIO rng failed
[    9.423681] serial8250 serial8250.7: GPIO lookup for consumer rts
[    9.424887] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.426072] serial8250 serial8250.7: lookup for GPIO rts failed
[    9.427083] serial8250 serial8250.7: GPIO lookup for consumer dtr
[    9.428146] serial8250 serial8250.7: using lookup tables for GPIO lookup
[    9.429325] serial8250 serial8250.7: lookup for GPIO dtr failed
[    9.432021] Cyclades driver 2.6
[    9.453397] MOXA Intellio family driver version 6.0k
[    9.454428] MOXA Smartio/Industio family driver version 2.0.5
[    9.455472] Initializing Nozomi driver 2.1d
[    9.456291] SyncLink MultiPort driver $Revision: 4.38 $
[    9.477599] SyncLink MultiPort driver $Revision: 4.38 $, tty major#235
[    9.478808] SyncLink serial driver $Revision: 4.38 $
[    9.500142] SyncLink serial driver $Revision: 4.38 $, tty major#234
[    9.501597] lp: driver loaded but no devices found
[    9.502451] CHRDEV "dtlk" major number 233 goes below the dynamic allocation range
[    9.503827] DoubleTalk PC - not found
[    9.504498] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    9.505744] ac.o: No PCI boards found.
[    9.506431] ac.o: For an ISA board you must supply memory and irq parameters.
[    9.507661] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    9.508790] ppdev: user-space parallel port driver
[    9.510059] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    9.511599] platform pc8736x_gpio.0: no device found
[    9.512620] nsc_gpio initializing
[    9.513226] CHRDEV "telco_clock" major number 233 goes below the dynamic allocation range
[    9.514719] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    9.515831] Linux agpgart interface v0.103
[    9.517262] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    9.518839] CHRDEV "aux" major number 233 goes below the dynamic allocation range
[    9.520185] [drm] Initialized drm 1.1.0 20060810
[    9.521147] [drm] radeon kernel modesetting enabled.
[    9.524011] [drm] Found bochs VGA, ID 0xb0c0.
[    9.524801] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[    9.526225] [TTM] Zone  kernel: Available graphics memory: 110156 kiB
[    9.527343] [TTM] Initializing pool allocator
[    9.528596] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[    9.530723] parport_pc 00:04: reported by Plug and Play ACPI
[    9.532007] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    9.534465] lp0: using parport0 (interrupt-driven).
[    9.536922] Failed to find cpu0 device node
[    9.537677] Unable to detect cache hierarchy from DT for CPU 0
[    9.538788] dummy-irq: no IRQ given.  Use irq=N
[    9.539967] CHRDEV "hpilo" major number 232 goes below the dynamic allocation range
[    9.541584] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    9.543334] c2port c2port0: C2 port uc added
[    9.544085] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[    9.545787] CHRDEV "mei" major number 231 goes below the dynamic allocation range
[    9.547308] Guest personality initialized and is inactive
[    9.548505] VMCI host device registered (name=vmci, major=10, minor=60)
[    9.549669] Initialized host personality
[    9.677848] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    9.694400] NCI uart driver 'nfcmrvl_uart [0]' registered
[    9.695744] mtdoops: mtd device (mtddev=name/number) must be supplied
[    9.696910] device id = 2440
[    9.697445] device id = 2480
[    9.697965] device id = 24c0
[    9.698557] device id = 24d0
[    9.699069] device id = 25a1
[    9.699612] device id = 2670
[    9.700397] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    9.701722] pmc551: not detected
[    9.706966] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.721999] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.723646] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.725294] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.726959] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.728753] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[    9.730413] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[    9.731536] nand: Toshiba NAND 128MiB 1,8V 8-bit
[    9.732364] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[    9.746413] flash size: 128 MiB
[    9.746991] page size: 512 bytes
[    9.747590] OOB area size: 16 bytes
[    9.748216] sector size: 16 KiB
[    9.748757] pages number: 262144
[    9.749367] pages per sector: 32
[    9.749944] bus width: 8
[    9.750435] bits in sector size: 14
[    9.751059] bits in page size: 9
[    9.751660] bits in OOB size: 4
[    9.752253] flash size with OOB: 135168 KiB
[    9.752973] page address bytes: 4
[    9.753590] sector address bytes: 3
[    9.754229] options: 0x42
[    9.755651] Scanning device for bad blocks
[    9.806659] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[    9.807815] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[    9.829027] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    9.831344] CHRDEV "macvtap" major number 230 goes below the dynamic allocation range
[    9.848986] libphy: Fixed MDIO Bus: probed
[    9.850819] arcnet: arcnet loaded
[    9.851452] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded
[    9.852838] arcnet:capmode: cap mode (`c') encapsulation support loaded
[    9.854050] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[    9.855467] arcnet:com90io: E-mail me if you actually test this driver, please!
[    9.856748] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[    9.858802] vcan: Virtual CAN interface driver
[    9.859634] slcan: serial line CAN interface driver
[    9.873685] slcan: 10 dynamic interface channels.
[    9.874561] libphy: mdio_driver_register: mv88e6085
[    9.875957] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    9.877112] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[    9.879402] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    9.880508] e100: Copyright(c) 1999-2006 Intel Corporation
[    9.881563] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    9.882822] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   10.076803] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   10.640315] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   10.642685] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   10.644031] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   10.645048] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   10.649291] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   10.652623] igb: Copyright (c) 2007-2014 Intel Corporation.
[   10.653739] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[   10.658230] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   10.659426] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[   10.662874] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   10.664179] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k
[   10.671874] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[   10.673241] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.11-k
[   10.679177] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[   10.683393] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[   10.685721] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[   10.686833] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 1.6.11-k
[   10.693266] Copyright (c) 2013 - 2015 Intel Corporation.
[   10.694530] Intel(R) Ethernet Switch Host Interface Driver - version 0.21.2-k
[   10.695810] Copyright (c) 2013 - 2016 Intel Corporation.
[   10.696949] jme: JMicron JMC2XX ethernet driver version 1.0.8
[   10.698412] myri10ge: Version 1.5.3-1.534
[   10.699231] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[   10.700861] atp.c:v1.09=ac 2002/10/01 Donald Becker <becker@scyld.com>
[   10.702461] Solarflare NET driver v4.0
[   10.705023] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[   10.706043] plip0: Parallel port at 0x378, using IRQ 7.
[   10.707725] PPP generic driver version 2.4.2
[   10.708920] PPP BSD Compression module registered
[   10.709770] PPP Deflate Compression module registered
[   10.710730] NET: Registered protocol family 24
[   10.711541] PPTP driver version 0.8.5
[   10.712367] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[   10.713621] CHRDEV "uio" major number 229 goes below the dynamic allocation range
[   10.715526] parport0: cannot grant exclusive access for device ks0108
[   10.716663] ks0108: ERROR: parport didn't register new device
[   10.717677] cfag12864b: ERROR: ks0108 is not initialized
[   10.718664] cfag12864bfb: ERROR: cfag12864b is not initialized
[   10.720352] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   10.723808] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.725955] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.731656] parport0: cannot grant exclusive access for device parkbd
[   10.737088] mousedev: PS/2 mouse device common for all mice
[   10.742220] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   10.748788] logibm.c: Didn't find Logitech busmouse at 0x23c
[   10.753462] mk712: device not present
[   10.758096] i2c /dev entries driver
[   10.763653] i2c-parport-light: adapter type unspecified
[   10.765773] isa i2c-pca-isa.0: Please specify I/O base
[   10.773339] smssdio: Siano SMS1xxx SDIO driver
[   10.774124] smssdio: Copyright Pierre Ossman
[   10.778536] pps pps0: new PPS source ktimer
[   10.779812] pps pps0: ktimer PPS source registered
[   10.783519] pps_ldisc: PPS line discipline registered
[   10.784453] pps_parport: parallel port PPS client
[   10.787675] parport0: cannot grant exclusive access for device pps_parport
[   10.791030] pps_parport: couldn't register with parport0
[   10.793211] Driver for 1-wire Dallas network protocol.
[   10.794662] __power_supply_register: Expected proper parent device for 'test_ac'
[   10.799313] power_supply test_ac: uevent
[   10.802296] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   10.805261] __power_supply_register: Expected proper parent device for 'test_battery'
[   10.807680] power_supply test_battery: uevent
[   10.809537] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   10.813089] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[   10.817869] power_supply test_ac: power_supply_changed
[   10.817920] power_supply test_ac: power_supply_changed_work
[   10.817925] power_supply test_ac: power_supply_update_gen_leds 1
[   10.817957] power_supply test_ac: uevent
[   10.817959] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   10.817965] power_supply test_ac: prop ONLINE=1
[   10.830946] __power_supply_register: Expected proper parent device for 'test_usb'
[   10.832628] power_supply test_usb: uevent
[   10.833410] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   10.841341] power_supply test_battery: power_supply_changed
[   10.842435] power_supply test_battery: power_supply_changed_work
[   10.844284] power_supply test_battery: power_supply_update_bat_leds 2
[   10.845590] power_supply test_battery: uevent
[   10.849443] mixcomwd: No card detected, or port not available
[   10.849692] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   10.849694] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[   10.849696] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   10.850318] geodewdt: No timers were available
[   10.850434] ib700wdt: WDT driver for IB700 single board computer initialising
[   10.854878] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[   10.854884] wafer5823wdt: I/O address 0x0443 already in use
[   10.854932] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05
[   10.855243] i6300esb: cannot register miscdev on minor=130 (err=-16)
[   10.855270] i6300ESB timer: probe of 0000:00:04.0 failed with error -16
[   10.855325] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.855510] sc1200wdt: build 20020303
[   10.855563] sc1200wdt: io parameter must be specified
[   10.855591] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   10.855846] sbc60xxwdt: I/O address 0x0443 already in use
[   10.855850] sbc8360: failed to register misc device
[   10.855853] sbc7240_wdt: I/O address 0x0443 already in use
[   10.855866] cpu5wdt: misc_register failed
[   10.855947] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[   10.857106] smsc37b787_wdt: Unable to register miscdev on minor 130
[   10.857208] w83877f_wdt: I/O address 0x0443 already in use
[   10.857210] w83977f_wdt: driver v1.00
[   10.857212] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[   10.857215] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[   10.857694] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   10.857695] wbsd: Copyright(c) Pierre Ossman
[   10.858992] leds_ss4200: no LED devices found
[   10.862397] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   10.868577] NET: Registered protocol family 40
[   10.879604] Software Queue-Pair Transport over NTB, version 4
[   10.879814] intel_rapl: driver does not support CPU family 6 model 6
[   10.887486] CHRDEV "dummy_stm.0" major number 228 goes below the dynamic allocation range
[   10.891921] CHRDEV "dummy_stm.1" major number 227 goes below the dynamic allocation range
[   10.898782] CHRDEV "dummy_stm.2" major number 225 goes below the dynamic allocation range
[   10.903565] CHRDEV "dummy_stm.3" major number 224 goes below the dynamic allocation range
[   10.906476] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
[   10.906477] aedsp16: I/O, IRQ and DMA are mandatory
[   10.906478] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996
[   10.906480] I/O, IRQ, DMA and type are mandatory
[   10.906480] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[   10.906482] ad1848: No ISAPnP cards found, trying standard ones...
[   10.906490] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[   10.906491] I/O, IRQ, DMA and type are mandatory
[   10.906492] sb: Init: Starting Probe...
[   10.906550] sb: Init: Done
[   10.906579] Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc
[   10.906673] uart6850: irq and io must be set.
[   10.906674] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
[   10.906743] oprofile: using NMI interrupt.
[   10.906800] drop_monitor: Initializing network drop monitor service
[   10.906929] Netfilter messages via NETLINK v0.30.
[   10.907082] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[   10.907199] ctnetlink v0.93: registering with nfnetlink.
[   10.907296] IPVS: Registered protocols (UDP, SCTP)
[   10.907316] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[   10.907317] IPVS: Each connection entry needs 240 bytes at least
[   10.908255] IPVS: Creating netns size=1500 id=0
[   10.912671] IPVS: ipvs loaded.
[   10.912683] IPVS: [rr] scheduler registered.
[   10.912685] IPVS: [wrr] scheduler registered.
[   10.912686] IPVS: [wlc] scheduler registered.
[   10.912688] IPVS: [fo] scheduler registered.
[   10.912689] IPVS: [ovf] scheduler registered.
[   10.912697] IPVS: [lblcr] scheduler registered.
[   10.912698] IPVS: [dh] scheduler registered.
[   10.912699] IPVS: [nq] scheduler registered.
[   10.912795] ipip: IPv4 and MPLS over IPv4 tunneling driver
[   10.913543] gre: GRE over IPv4 demultiplexor driver
[   10.913544] ip_gre: GRE over IPv4 tunneling driver
[   10.917425] IPv4 over IPsec tunneling driver
[   10.918741] NET: Registered protocol family 17
[   10.918762] NET: Registered protocol family 15
[   10.918871] NET: Registered protocol family 4
[   10.918943] NET: Registered protocol family 9
[   10.918946] X25: Linux Version 0.2
[   10.918980] can: controller area network core (rev 20120528 abi 9)
[   10.919071] NET: Registered protocol family 29
[   10.919073] can: broadcast manager protocol (rev 20160617 t)
[   10.919091] can: netlink gateway (rev 20130117) max_hops=1
[   10.925052] NET: Registered protocol family 33
[   10.925070] Key type rxrpc registered
[   10.925072] Key type rxrpc_s registered
[   10.925173] lec:lane_module_init: lec.c: initialized
[   10.925182] mpoa:atm_mpoa_init: mpc.c: initialized
[   10.925207] l2tp_core: L2TP core driver, V2.0
[   10.925218] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   10.925218] l2tp_netlink: L2TP netlink interface
[   10.925313] l2tp_debugfs: L2TP debugfs support
[   10.925314] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   10.925400] DECnet: Routing cache hash table of 256 buckets, 9Kbytes
[   10.925418] NET: Registered protocol family 12
[   10.925434] 8021q: 802.1Q VLAN Support v1.8
[   10.925763] DCCP: Activated CCID 2 (TCP-like)
[   10.925783] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[   10.925870] sctp: Hash tables configured (bind 64/113)
[   10.926007] NET: Registered protocol family 37
[   10.926104] Key type dns_resolver registered
[   10.926119] Key type ceph registered
[   10.926551] libceph: loaded (mon/osd proto 15/24)
[   10.926554] openvswitch: Open vSwitch switching datapath
[   10.935629] mpls_gso: MPLS GSO support
[   10.938437] ... APIC ID:      00000000 (0)
[   10.938442] ... APIC VERSION: 01050014
[   10.938490] 0000000000000000000000000000000000000000000000000000000000000000
[   10.938521] 0000000000000000000000000000000000000000000000000000000000000000
[   10.938551] 0000000000000000000000000000000000000000000000000000000000000000
[   10.938589] 
[   10.938591] number of MP IRQ sources: 15.
[   10.938592] number of IO-APIC #0 registers: 24.
[   10.938592] testing the IO APIC.......................
[   10.938616] IO APIC #0......
[   10.938617] .... register #00: 00000000
[   10.938617] .......    : physical APIC id: 00
[   10.938618] .......    : Delivery Type: 0
[   10.938619] .......    : LTS          : 0
[   10.938620] .... register #01: 00170011
[   10.938620] .......     : max redirection entries: 17
[   10.938621] .......     : PRQ implemented: 0
[   10.938622] .......     : IO APIC version: 11
[   10.938623] .... register #02: 00000000
[   10.938623] .......     : arbitration: 00
[   10.938624] .... IRQ redirection table:
[   10.938625] IOAPIC 0:
[   10.938641]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938657]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   10.938672]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   10.938688]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938703]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938719]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938734]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938750]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   10.938765]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938781]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   10.938796]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938812]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938827]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   10.938843]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938858]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938874]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938889]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938905]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938920]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938936]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938951]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938967]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938982]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938998]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   10.938998] IRQ to pin mappings:
[   10.939002] IRQ0 -> 0:2
[   10.939004] IRQ1 -> 0:1
[   10.939006] IRQ3 -> 0:3
[   10.939008] IRQ4 -> 0:4
[   10.939010] IRQ5 -> 0:5
[   10.939012] IRQ6 -> 0:6
[   10.939013] IRQ7 -> 0:7
[   10.939015] IRQ8 -> 0:8
[   10.939017] IRQ9 -> 0:9
[   10.939019] IRQ10 -> 0:10
[   10.939021] IRQ11 -> 0:11
[   10.939023] IRQ12 -> 0:12
[   10.939025] IRQ13 -> 0:13
[   10.939027] IRQ14 -> 0:14
[   10.939028] IRQ15 -> 0:15
[   10.939029] .................................... done.
[   10.939030] Using IPI Shortcut mode
[   11.091913] console [netcon0] enabled
[   11.095628] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   11.095660] power_supply test_battery: prop STATUS=Discharging
[   11.095665] power_supply test_battery: prop CHARGE_TYPE=Fast
[   11.095667] power_supply test_battery: prop HEALTH=Good
[   11.095671] power_supply test_battery: prop PRESENT=1
[   11.095673] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   11.095676] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   11.095678] power_supply test_battery: prop CHARGE_FULL=100
[   11.095681] power_supply test_battery: prop CHARGE_NOW=50
[   11.095684] power_supply test_battery: prop CAPACITY=50
[   11.095686] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   11.095689] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   11.095692] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   11.095694] power_supply test_battery: prop MODEL_NAME=Test battery
[   11.095697] power_supply test_battery: prop MANUFACTURER=Linux
[   11.095700] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc2-00241-g68263dd
[   11.095702] power_supply test_battery: prop TEMP=26
[   11.095705] power_supply test_battery: prop VOLTAGE_NOW=3300
[   11.095722] power_supply test_usb: power_supply_changed
[   11.160971] power_supply test_usb: power_supply_changed_work
[   11.160979] power_supply test_usb: power_supply_update_gen_leds 1
[   11.161004] power_supply test_usb: uevent
[   11.161005] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   11.161015] power_supply test_usb: prop ONLINE=1
[   11.169868] netconsole: network logging started
[   11.171604] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   11.172815] EDD information not available.
[   11.174597] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[   11.180026] ### dt-test ### start of unittest - you will see error messages
[   11.181652] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   11.183830] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   11.186811] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   11.189166] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   11.190484] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   11.191879] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   11.193461] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[   11.196841] ### dt-test ### end of unittest - 110 passed, 0 failed
[   11.204979] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   11.209066] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.210501] IP-Config: Failed to open plip0
[   11.211450] IP-Config: Failed to open gretap0
[   11.224163] Sending DHCP requests ., OK
[   11.228243] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   11.229768] IP-Config: Complete:
[   11.230447]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   11.233185]      host=vm-lkp-st01-openwrt-ia32-6, domain=, nis-domain=(none)
[   11.234463]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[   11.237928] Freeing unused kernel memory: 1044K (8b4f3000 - 8b5f8000)
[   11.239760] Write protecting the kernel text: 13716k
[   11.241284] Write protecting the kernel read-only data: 7804k
[   11.449003] init: Console is alive
[   11.460689] init: - watchdog -
[   12.462963] init: - preinit -
[   12.485662] procd: - early -
[   12.487151] procd: - watchdog -
[   14.136521] procd: - ubus -
[   15.140891] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.144141] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.145256] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.161218] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.162396] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.167166] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.168361] random: ubusd: uninitialized urandom read (4 bytes read)
[   15.175632] procd: - init -
Please press Enter to activate this console.
[   18.232745] random: uci: uninitialized urandom read (6 bytes read)
[   18.513750] random: uci: uninitialized urandom read (6 bytes read)
[   18.645214] random: uci: uninitialized urandom read (6 bytes read)
[   20.470085] 8021q: adding VLAN 0 to HW filter on device eth0
LKP: HOSTNAME vm-lkp-st01-openwrt-ia32-6, MAC , kernel 4.8.0-rc2-00241-g68263dd 1, serial console /dev/ttyS0
[   22.475640] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   22.602089] Kernel tests: Boot OK!
[   23.465616] ------------[ cut here ]------------
[   23.466477] WARNING: CPU: 0 PID: 1225 at net/netfilter/nf_conntrack_seqadj.c:232 nf_ct_seq_offset+0x7a/0x9a
[   23.468458] Missing nfct_seqadj_ext_add() setup call
[   23.469319] CPU: 0 PID: 1225 Comm: busybox Not tainted 4.8.0-rc2-00241-g68263dd #1
[   23.470629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   23.472138]  00000000 8ca4db58 8ca4db28 8a045c76 8ca4db44 89e4a2a3 000000e8 8a97c7b6
[   23.491476]  00000001 00000000 00000001 8ca4db60 89e4a2e7 00000009 00000000 8ca4db58
[   23.493027]  8b2c55b0 8ca4db74 8ca4db80 8a97c7b6 8b2c55da 000000e8 8b2c55b0 8e358000
[   23.494559] Call Trace:
[   23.495013]  [<8a045c76>] dump_stack+0x16/0x18
[   23.495777]  [<89e4a2a3>] __warn+0xaa/0xc1
[   23.496500]  [<8a97c7b6>] ? nf_ct_seq_offset+0x7a/0x9a
[   23.497392]  [<89e4a2e7>] warn_slowpath_fmt+0x2d/0x32
[   23.498270]  [<8a97c7b6>] nf_ct_seq_offset+0x7a/0x9a
[   23.499134]  [<8a97b2a3>] tcp_packet+0x63f/0xb93
[   23.499924]  [<89f39167>] ? cache_alloc_refill+0x203/0x80a
[   23.500896]  [<89e6863e>] ? preempt_count_sub+0x8f/0xd4
[   23.501824]  [<8a976d99>] ? nf_conntrack_in+0x2f9/0x53e
[   23.502747]  [<8a976dc2>] ? nf_conntrack_in+0x322/0x53e
[   23.521594]  [<89e6863e>] ? preempt_count_sub+0x8f/0xd4
[   23.522508]  [<8a976f5b>] nf_conntrack_in+0x4bb/0x53e
[   23.523399]  [<8a9e6a9a>] ipv4_conntrack_local+0x40/0x48
[   23.524338]  [<8a9729c5>] nf_iterate+0x3b/0x8e
[   23.525128]  [<8a972a5f>] nf_hook_slow+0x47/0xc7
[   23.525925]  [<8a9a47f1>] __ip_local_out+0xdb/0xea
[   23.526766]  [<8a9a3750>] ? ip_options_rcv_srr+0x30e/0x30e
[   23.527785]  [<8a9a4818>] ip_local_out+0x18/0x9e
[   23.528600]  [<8a9a4dd8>] ip_queue_xmit+0x395/0x41e
[   23.529469]  [<8a9b93cb>] tcp_transmit_skb+0x701/0x740
[   23.530420]  [<8a9bbcba>] tcp_connect+0x65a/0x6be
[   23.531247]  [<8a9bd9e3>] tcp_v4_connect+0x41d/0x45c
[   23.532115]  [<8a9d1a6c>] __inet_stream_connect+0x77/0x27e
[   23.533107]  [<89e6863e>] ? preempt_count_sub+0x8f/0xd4
[   23.534018]  [<89e4d8e1>] ? __local_bh_enable_ip+0xc4/0xea
[   23.534949]  [<8a9d1c9e>] inet_stream_connect+0x2b/0x3e
[   23.535862]  [<8a935255>] SyS_connect+0x77/0x9d
[   23.536662]  [<89f74959>] ? __fd_install+0x163/0x1c5
[   23.538079]  [<89e6863e>] ? preempt_count_sub+0x8f/0xd4
[   23.539945]  [<89f749aa>] ? __fd_install+0x1b4/0x1c5
[   23.540936]  [<89e6ab26>] ? __might_sleep+0x9f/0xa7
[   23.541801]  [<8a051466>] ? _copy_from_user+0x96/0xb0
[   23.542691]  [<8a935cd7>] SyS_socketcall+0xe4/0x1f2
[   23.543838]  [<89f4ab95>] ? mem_cgroup_handle_over_high+0x2d/0x125
[   23.544924]  [<89e011af>] do_int80_syscall_32+0x6c/0xdc
[   23.545852]  [<8ab62eb2>] entry_INT80_32+0x2a/0x2a
[   23.546698] ---[ end trace 6043dc50327eb021 ]---
[   23.603106] /lkp/lkp/src/bin/run-lkp
[   23.603106] RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/0
[   23.603106] job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml
[   23.603106] run-job /lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml
[   23.603106] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml&job_state=running -O /dev/null
[   28.668103] kill 1294 cat /proc/kmsg 
[   29.670011] wait for background monitors: 1296 1300 oom-killer nfs-hang
[   31.672965] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml&loadavg=2.23 0.54 0.18 2/69 1575&start_time=1473889509&end_time=1473889510&version=/lkp/lkp/.src-20160914-173700& -O /dev/null
[   32.680124] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml&job_state=finished -O /dev/null
[   33.133598] sysrq: SysRq : Emergency Sync
[   33.138619] Emergency Sync complete
[   33.139338] sysrq: SysRq : Resetting

Elapsed time: 40

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.cgz
	/lkp/lkp/lkp-i386.cgz
)

cat "${initrds[@]}" > /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-6

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/vmlinuz-4.8.0-rc2-00241-g68263dd
	-initrd /fs/sda3/initrd-vm-lkp-st01-openwrt-ia32-6
	-m 256
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-st01-openwrt-ia32-6
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-6/serial
	-serial file:/dev/shm/kboot/vm-lkp-st01-openwrt-ia32-6/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-st01-openwrt-ia32-6::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-st01-openwrt-ia32-6/boot-1-openwrt-i386-2016-03-16.cgz-68263ddb4777cc996868498e3d56f616851966d2-20160915-108777-1mlhhjv-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-h1-09141703
	branch=linux-devel/devel-hourly-2016091414
	commit=68263ddb4777cc996868498e3d56f616851966d2
	BOOT_IMAGE=/pkg/linux/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/vmlinuz-4.8.0-rc2-00241-g68263dd
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-st01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-h1-09141703/gcc-6/68263ddb4777cc996868498e3d56f616851966d2/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
