v2-v3: Move error handing into separate patch, replace a couple cases
of fixed errors with the errors being returned from the failing functions.
Hoist irq handler.
The smsc911x driver is doing a number of things in its probe routine that
should be delayed until the interface is started. Because of this, the module
cannot be unloaded, the phy states are incorrect/stale if the interface isn't
running, open's unnecessarily fail causing network configuration problems, and
the /proc/irq nodes are incorrectly named.
Clean up a number of these problems by moving the mdio and interrupt
configuration into the smsc911x_open routine.
Jeremy Linton (4):
net: smsc911x: Remove multiple exit points from smsc911x_open
net: smsc911x: Fix register_netdev, phy startup, driver unload
ordering
net: smsc911x: Move interrupt handler before open
net: smsc911x: Move interrupt allocation to open/stop
drivers/net/ethernet/smsc/smsc911x.c | 213 +++++++++++++++++------------------
1 file changed, 104 insertions(+), 109 deletions(-)
--
2.5.5
