Am Mittwoch, 31. August 2016, 04:30:06 schrieb Caesar Wang:
> This patch adds needed gamc information for rk3399,
> also support the gmac pd.
>
> Signed-off-by: Roger Chen <roger.c...@rock-chips.com>
> Signed-off-by: Caesar Wang <w...@rock-chips.com>
> ---
>
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 90
> ++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 32aebc8..53ac651 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -200,6 +200,26 @@
> };
> };
>
> + gmac: eth@fe300000 {
> + compatible = "rockchip,rk3399-gmac";
> + reg = <0x0 0xfe300000 0x0 0x10000>;
> + rockchip,grf = <&grf>;
should move below the reset-names .
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
> + <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
> + <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
> + <&cru PCLK_GMAC>;
> + clock-names = "stmmaceth", "mac_clk_rx",
> + "mac_clk_tx", "clk_mac_ref",
> + "clk_mac_refout", "aclk_mac",
> + "pclk_mac";
> + resets = <&cru SRST_A_GMAC>;
> + reset-names = "stmmaceth";
> + power-domains = <&power RK3399_PD_GMAC>;
The driver core should handle regular power-domain handling on device creation
already, right? So I should be able to apply patches 3 and 4 even without the
dwmac patches, right?
Also if resending please move power-domains above resets
Heiko
