On Fri, 2016-08-26 at 19:35 +0100, Colin King wrote:
> Trivial fix to spelling mistake in dev_warn message.
Thanks Colin
Are you also fixing up comments and such?
$ git grep -i -E "\bmulit"
Documentation/networking/kcm.txt:Kernel Connection Mulitplexor
arch/arm/mach-s3c64xx/include/mach/irqs.h: * mulitple of 32 to allow the common
code to work
arch/arm64/lib/strncmp.S: * when limit is mulitply of 8, if not sub 1,
drivers/ata/ahci_xgene.c: * for case of Port Mulitplier.
drivers/iommu/intel-iommu.c:/* si_domain contains mulitple devices */
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c:
pr_debug("STMMAC: err in setting mulitcast filter\n");
drivers/net/wan/cosa.c: * interested in the SMP and/or muliti-channel
success/failure reports
drivers/rtc/rtc-m41t80.c: * WDS = 1 (0x80), mulitplier =
WD_TIMO, resolution = 1s (0x02)
fs/fat/namei_vfat.c: * lowercase char, muliti bytes char, etc. In this case
numtail is not
include/net/dn_dev.h: int mode; /* Broadcast, Unicast,
Mulitpoint */
include/uapi/drm/i915_drm.h: int num_cliprects; /* mulitpass with
multiple cliprects? */
include/uapi/drm/i915_drm.h: int num_cliprects; /* mulitpass with
multiple cliprects? */
net/netfilter/ipvs/ip_vs_sync.c: The master mulitcasts messages (Datagrams) to
the backup load balancers
scripts/spelling.txt:mulitplied||multiplied
sound/soc/codecs/wm9713.h:/* MCLK clock mulitipliers */
