Implement the .set_eeprom callback to allow setting the MAC address
as well as a few other parameters. Note that the EEPROM must have a
correct PID/VID checksum set otherwise the SROM is used and reads
return the SROM content.
Signed-off-by: Alban Bedel <alban.be...@avionic-design.de>
---
drivers/net/usb/ax88179_178a.c | 57 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c16081a..e6a986303dad 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -28,6 +28,7 @@
#define AX88179_PHY_ID 0x03
#define AX_EEPROM_LEN 0x100
+#define AX_EEPROM_BLOCK 0x40u
#define AX88179_EEPROM_MAGIC 0x17900b95
#define AX_MCAST_FLTSIZE 8
#define AX_MAX_MCAST 64
@@ -43,6 +44,7 @@
#define AX_ACCESS_PHY 0x02
#define AX_ACCESS_EEPROM 0x04
#define AX_ACCESS_EFUS 0x05
+#define AX_RELOAD_EEPROM 0x06
#define AX_PAUSE_WATERLVL_HIGH 0x54
#define AX_PAUSE_WATERLVL_LOW 0x55
@@ -620,6 +622,60 @@ ax88179_get_eeprom(struct net_device *net, struct
ethtool_eeprom *eeprom,
return 0;
}
+static int
+ax88179_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ unsigned int offset = eeprom->offset;
+ unsigned int len = eeprom->len;
+ int i, err = 0;
+ u8 *block;
+
+ /* The EEPROM data must be aligned on blocks of 64 bytes */
+ if ((offset % AX_EEPROM_BLOCK) || (len % AX_EEPROM_BLOCK)) {
+ offset = eeprom->offset / AX_EEPROM_BLOCK * AX_EEPROM_BLOCK;
+ len = eeprom->len + eeprom->offset - offset;
+ len = DIV_ROUND_UP(len, AX_EEPROM_BLOCK) * AX_EEPROM_BLOCK;
+
+ block = kmalloc(len, GFP_KERNEL);
+ if (!block)
+ return -ENOMEM;
+
+ /* Copy the current data, we could skip some but KISS */
+ for (i = 0; i < len; i += AX_EEPROM_BLOCK) {
+ err = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM,
+ (offset + i) >> 1,
+ AX_EEPROM_BLOCK >> 1,
+ AX_EEPROM_BLOCK,
+ &block[i], 0);
+ if (err < 0) {
+ kfree(block);
+ return err;
+ }
+ }
+ memcpy(block + eeprom->offset - offset, data, eeprom->len);
+ } else {
+ block = data;
+ }
+
+ for (i = 0; err >= 0 && i < len; i += AX_EEPROM_BLOCK) {
+ err = ax88179_write_cmd(dev, AX_ACCESS_EEPROM,
+ (offset + i) >> 1,
+ AX_EEPROM_BLOCK >> 1,
+ AX_EEPROM_BLOCK, &block[i]);
+ }
+
+ if (block != data)
+ kfree(block);
+
+ /* Reload the EEPROM */
+ if (err >= 0)
+ err = ax88179_write_cmd(dev, AX_RELOAD_EEPROM, 0, 0, 0, NULL);
+
+ return err < 0 ? err : 0;
+}
+
static int ax88179_get_settings(struct net_device *net, struct ethtool_cmd
*cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -826,6 +882,7 @@ static const struct ethtool_ops ax88179_ethtool_ops = {
.set_wol = ax88179_set_wol,
.get_eeprom_len = ax88179_get_eeprom_len,
.get_eeprom = ax88179_get_eeprom,
+ .set_eeprom = ax88179_set_eeprom,
.get_settings = ax88179_get_settings,
.set_settings = ax88179_set_settings,
.get_eee = ax88179_get_eee,
--
2.9.3
