On 08/12/16 05:58, LABBE Corentin wrote:
> This patch respell some word badly spelled.
> - Invidate instead of Invalidate
> - proble instead of probe
> 
> Signed-off-by: LABBE Corentin <clabbe.montj...@gmail.com>
> ---
>  drivers/net/ethernet/adi/bfin_mac.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/adi/bfin_mac.c 
> b/drivers/net/ethernet/adi/bfin_mac.c
> index 38eaea1..00f9ee3 100644
> --- a/drivers/net/ethernet/adi/bfin_mac.c
> +++ b/drivers/net/ethernet/adi/bfin_mac.c
> @@ -192,8 +192,8 @@ static int desc_list_init(struct net_device *dev)
>                       goto init_error;
>  
>               skb_reserve(new_skb, NET_IP_ALIGN);
> -             /* Invidate the data cache of skb->data range when it is write 
> back
> -              * cache. It will prevent overwritting the new data from DMA
> +             /* Invalidate the data cache of skb->data range when it is 
> write back
> +              * cache. It will prevent overwriting the new data from DMA
>                */
>               blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
>                                        (unsigned long)new_skb->end);
> @@ -1205,7 +1205,7 @@ static void bfin_mac_rx(struct bfin_mac_local *lp)
>       }
>       /* reserve 2 bytes for RXDWA padding */
>       skb_reserve(new_skb, NET_IP_ALIGN);
> -     /* Invidate the data cache of skb->data range when it is write back
> +     /* Invalidate the data cache of skb->data range when it is write back
>        * cache. It will prevent overwritting the new data from DMA

                                  overwriting

>        */
>       blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
> @@ -1599,7 +1599,7 @@ static int bfin_mac_probe(struct platform_device *pdev)
>       *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) 
> bfin_read_EMAC_ADDRHI());
>  
>       /* probe mac */
> -     /*todo: how to proble? which is revision_register */
> +     /*todo: how to probe? which is revision_register */
>       bfin_write_EMAC_ADDRLO(0x12345678);
>       if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
>               dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet 
> MAC controller!\n");
> 


-- 
~Randy

Reply via email to