This adds missing documentation of geneve type options: - dstport - external - udpcsum - udp6zerocsumtx - udp6zerocsumrx
The bits for the last three was just copy and pasted from vxlan section. Signed-off-by: Phil Sutter <p...@nwl.cc> --- man/man8/ip-link.8.in | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in index f4782ee5b8555..58247ced448df 100644 --- a/man/man8/ip-link.8.in +++ b/man/man8/ip-link.8.in @@ -801,6 +801,16 @@ the following additional arguments are supported: .BI tos " TOS " ] [ .BI flowlabel " FLOWLABEL " +] [ +.BI dstport " PORT" +] [ +.RB [ no ] external +] [ +.RB [ no ] udpcsum +] [ +.RB [ no ] udp6zerocsumtx +] [ +.RB [ no ] udp6zerocsumrx ] .in +8 @@ -824,6 +834,32 @@ the following additional arguments are supported: .BI flowlabel " FLOWLABEL" - specifies the flow label to use in outgoing packets. +.sp +.BI dstport " PORT" +- select a destination port other than the default of 6081. + +.sp +.RB [ no ] external +- make this tunnel externally controlled (or not, which is the default). This +flag is mutually exclusive with the +.BR id , +.BR remote , +.BR ttl , +.BR tos " and " flowlabel +options. + +.sp +.RB [ no ] udpcsum +- specifies if UDP checksum is calculated for transmitted packets over IPv4. + +.sp +.RB [ no ] udp6zerocsumtx +- skip UDP checksum calculation for transmitted packets over IPv6. + +.sp +.RB [ no ] udp6zerocsumrx +- allow incoming UDP packets over IPv6 with zero checksum field. + .in -8 .TP -- 2.8.2
