On Wed, Aug 3, 2016 at 10:11 AM, Alexei Starovoitov
<alexei.starovoi...@gmail.com> wrote:
> On Wed, Aug 03, 2016 at 10:01:54AM -0700, Tom Herbert wrote:
>> On Tue, Jul 19, 2016 at 12:16 PM, Brenden Blanco <bbla...@plumgrid.com>
>> wrote:
>> > Add a sample that rewrites and forwards packets out on the same
>> > interface. Observed single core forwarding performance of ~10Mpps.
>> >
>> > Since the mlx4 driver under test recycles every single packet page, the
>> > perf output shows almost exclusively just the ring management and bpf
>> > program work. Slowdowns are likely occurring due to cache misses.
>> >
>> > Signed-off-by: Brenden Blanco <bbla...@plumgrid.com>
>> > ---
>> > samples/bpf/Makefile | 5 +++
>> > samples/bpf/xdp2_kern.c | 114
>> > ++++++++++++++++++++++++++++++++++++++++++++++++
>> > 2 files changed, 119 insertions(+)
>> > create mode 100644 samples/bpf/xdp2_kern.c
>> >
>> > diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
>> > index 0e4ab3a..d2d2b35 100644
>> > --- a/samples/bpf/Makefile
>> > +++ b/samples/bpf/Makefile
>> > @@ -22,6 +22,7 @@ hostprogs-y += map_perf_test
>> > hostprogs-y += test_overhead
>> > hostprogs-y += test_cgrp2_array_pin
>> > hostprogs-y += xdp1
>> > +hostprogs-y += xdp2
>> >
>> > test_verifier-objs := test_verifier.o libbpf.o
>> > test_maps-objs := test_maps.o libbpf.o
>> > @@ -44,6 +45,8 @@ map_perf_test-objs := bpf_load.o libbpf.o
>> > map_perf_test_user.o
>> > test_overhead-objs := bpf_load.o libbpf.o test_overhead_user.o
>> > test_cgrp2_array_pin-objs := libbpf.o test_cgrp2_array_pin.o
>> > xdp1-objs := bpf_load.o libbpf.o xdp1_user.o
>> > +# reuse xdp1 source intentionally
>> > +xdp2-objs := bpf_load.o libbpf.o xdp1_user.o
>> >
>> > # Tell kbuild to always build the programs
>> > always := $(hostprogs-y)
>> > @@ -67,6 +70,7 @@ always += test_overhead_kprobe_kern.o
>> > always += parse_varlen.o parse_simple.o parse_ldabs.o
>> > always += test_cgrp2_tc_kern.o
>> > always += xdp1_kern.o
>> > +always += xdp2_kern.o
>> >
>> > HOSTCFLAGS += -I$(objtree)/usr/include
>> >
>> > @@ -88,6 +92,7 @@ HOSTLOADLIBES_spintest += -lelf
>> > HOSTLOADLIBES_map_perf_test += -lelf -lrt
>> > HOSTLOADLIBES_test_overhead += -lelf -lrt
>> > HOSTLOADLIBES_xdp1 += -lelf
>> > +HOSTLOADLIBES_xdp2 += -lelf
>> >
>> > # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine
>> > on cmdline:
>> > # make samples/bpf/ LLC=~/git/llvm/build/bin/llc
>> > CLANG=~/git/llvm/build/bin/clang
>> > diff --git a/samples/bpf/xdp2_kern.c b/samples/bpf/xdp2_kern.c
>> > new file mode 100644
>> > index 0000000..38fe7e1
>> > --- /dev/null
>> > +++ b/samples/bpf/xdp2_kern.c
>> > @@ -0,0 +1,114 @@
>> > +/* Copyright (c) 2016 PLUMgrid
>> > + *
>> > + * This program is free software; you can redistribute it and/or
>> > + * modify it under the terms of version 2 of the GNU General Public
>> > + * License as published by the Free Software Foundation.
>> > + */
>> > +#define KBUILD_MODNAME "foo"
>> > +#include <uapi/linux/bpf.h>
>> > +#include <linux/in.h>
>> > +#include <linux/if_ether.h>
>> > +#include <linux/if_packet.h>
>> > +#include <linux/if_vlan.h>
>> > +#include <linux/ip.h>
>> > +#include <linux/ipv6.h>
>> > +#include "bpf_helpers.h"
>> > +
>> > +struct bpf_map_def SEC("maps") dropcnt = {
>> > + .type = BPF_MAP_TYPE_PERCPU_ARRAY,
>> > + .key_size = sizeof(u32),
>> > + .value_size = sizeof(long),
>> > + .max_entries = 256,
>> > +};
>> > +
>> > +static void swap_src_dst_mac(void *data)
>> > +{
>> > + unsigned short *p = data;
>> > + unsigned short dst[3];
>> > +
>> > + dst[0] = p[0];
>> > + dst[1] = p[1];
>> > + dst[2] = p[2];
>> > + p[0] = p[3];
>> > + p[1] = p[4];
>> > + p[2] = p[5];
>> > + p[3] = dst[0];
>> > + p[4] = dst[1];
>> > + p[5] = dst[2];
>> > +}
>> > +
>> > +static int parse_ipv4(void *data, u64 nh_off, void *data_end)
>> > +{
>> > + struct iphdr *iph = data + nh_off;
>> > +
>> > + if (iph + 1 > data_end)
>> > + return 0;
>> > + return iph->protocol;
>> > +}
>> > +
>> > +static int parse_ipv6(void *data, u64 nh_off, void *data_end)
>> > +{
>> > + struct ipv6hdr *ip6h = data + nh_off;
>> > +
>> > + if (ip6h + 1 > data_end)
>> > + return 0;
>> > + return ip6h->nexthdr;
>> > +}
>> > +
>> > +SEC("xdp1")
>> > +int xdp_prog1(struct xdp_md *ctx)
>> > +{
>> > + void *data_end = (void *)(long)ctx->data_end;
>> > + void *data = (void *)(long)ctx->data;
>>
>> Brendan,
>>
>> It seems that the cast to long here is done because data_end and data
>> are u32s in xdp_md. So the effect is that we are upcasting a
>> thirty-bit integer into a sixty-four bit pointer (in fact without the
>> cast we see compiler warnings). I don't understand how this can be
>> correct. Can you shed some light on this?
>
> please see:
> http://lists.iovisor.org/pipermail/iovisor-dev/2016-August/000355.html
>
That doesn't explain it. The only thing I can figure is that there is
an implicit assumption somewhere that even though the pointer size may
be 64 bits, only the low order thirty-two bits are relevant in this
environment (i.e. upper bit are always zero for any pointers)-- so
then it would safe store pointers as u32 and to upcast them to void *.
If this is indeed the case, then we really need to make this explicit
to the user. Casting to long without comment just to avoid the
compiler warning is not good programming style, maybe a function
xdp_md_data_to_ptr or the like could be used.
Tom
