On Tue, 2016-07-26 at 23:32 +0800, Fengguang Wu wrote:
> Hi Eric,
>
> It works!
>
> On Tue, Jul 26, 2016 at 11:14:52AM +0200, Eric Dumazet wrote:
> >On Tue, 2016-07-26 at 11:50 +0800, Fengguang Wu wrote:
> >> Greetings,
> >>
> >> This BUG message can be found in recent kernels as well as v4.4 and
> >> linux-stable. It happens when running
> >>
> >> modprobe netconsole netconsole=@/,$port@$server/
> >>
> >> [ 39.937534] 22 Jul 13:30:40 ntpdate[440]: step time server 192.168.1.1
> >> offset -673.833841 sec
> >> [ 39.943285] netpoll: netconsole: local port 6665
> >> [ 39.943436] netpoll: netconsole: local IPv4 address 0.0.0.0
> >> [ 39.943609] netpoll: netconsole: interface 'eth0'
> >> [ 39.943756] netpoll: netconsole: remote port 6672
> >> [ 39.943913] netpoll: netconsole: remote IPv4 address 192.168.1.1
> >> [ 39.944099] netpoll: netconsole: remote ethernet address
> >> ff:ff:ff:ff:ff:ff
> >> [ 39.944311] netpoll: netconsole: local IP 192.168.1.193
> >> [ 39.944514] BUG: sleeping function called from invalid context at
> >> kernel/irq/manage.c:110
> >> [ 39.944515] in_atomic(): 1, irqs_disabled(): 1, pid: 448, name: modprobe
> >> [ 39.944517] CPU: 6 PID: 448 Comm: modprobe Not tainted
> >> 4.7.0-rc7-wt-ath-10122-gf9b5ec2 #102
> >> [ 39.944518] Hardware name: /DZ77BH-55K, BIOS
> >> BHZ7710H.86A.0097.2012.1228.1346 12/28/2012
> >> [ 39.944522] 0000000000000000 ffffc90001f2f9e8 ffffffff813417d9
> >> ffff88007faba5c0
> >> [ 39.944524] 000000000000006e ffffc90001f2fa00 ffffffff810aec03
> >> ffffffff81a25948
> >> [ 39.944525] ffffc90001f2fa28 ffffffff810aec9a ffff8803e5bd9400
> >> ffff8803e50fbd68
> >> [ 39.944526] Call Trace:
> >> [ 39.944533] [<ffffffff813417d9>] dump_stack+0x63/0x8a
> >> [ 39.944536] [<ffffffff810aec03>] ___might_sleep+0xd3/0x120
> >> [ 39.944537] [<ffffffff810aec9a>] __might_sleep+0x4a/0x80
> >> [ 39.944541] [<ffffffff810e4638>] synchronize_irq+0x38/0xa0
> >> [ 39.944543] [<ffffffff810e3c8e>] ? __irq_put_desc_unlock+0x1e/0x40
> >> [ 39.944545] [<ffffffff810e48e3>] ? __disable_irq_nosync+0x43/0x60
> >> [ 39.944547] [<ffffffff810e492c>] disable_irq+0x1c/0x20
> >> [ 39.944559] [<ffffffffa0220932>] e1000_netpoll+0xf2/0x120 [e1000e]
> >> [ 39.944563] [<ffffffff815f2bdc>] netpoll_poll_dev+0x5c/0x1a0
> >> [ 39.944567] [<ffffffff815bb361>] ? __kmalloc_reserve+0x31/0x90
> >> [ 39.944569] [<ffffffff815f2e8b>] netpoll_send_skb_on_dev+0x16b/0x250
> >> [ 39.944572] [<ffffffff815f325c>] netpoll_send_udp+0x2ec/0x450
> >> [ 39.944576] [<ffffffffa003cb62>] write_msg+0xb2/0xf0 [netconsole]
> >> [ 39.944578] [<ffffffff810e04e5>] call_console_drivers+0x115/0x120
> >> [ 39.944580] [<ffffffff810e1f13>] console_unlock+0x333/0x5c0
> >> [ 39.944583] [<ffffffff810e2c74>] register_console+0x1c4/0x380
> >> [ 39.944586] [<ffffffffa004f1c5>] init_netconsole+0x1c5/0x1000
> >> [netconsole]
> >> [ 39.944588] [<ffffffffa004f000>] ? 0xffffffffa004f000
> >> [ 39.944591] [<ffffffff8100216d>] do_one_initcall+0x3d/0x150
> >> [ 39.944592] [<ffffffff810aec9a>] ? __might_sleep+0x4a/0x80
> >> [ 39.944596] [<ffffffff811f5098>] ? kmem_cache_alloc_trace+0x188/0x1e0
> >> [ 39.944598] [<ffffffff8118f871>] do_init_module+0x5f/0x1d8
> >> [ 39.944602] [<ffffffff81114009>] load_module+0x1429/0x1b40
> >> [ 39.944604] [<ffffffff81110cd0>] ? __symbol_put+0x40/0x40
> >> [ 39.944607] [<ffffffff8121f348>] ? kernel_read_file+0x178/0x1a0
> >> [ 39.944608] [<ffffffff8121f429>] ? kernel_read_file_from_fd+0x49/0x80
> >> [ 39.944611] [<ffffffff81114973>] SYSC_finit_module+0xc3/0xf0
> >> [ 39.944614] [<ffffffff811149be>] SyS_finit_module+0xe/0x10
> >> [ 39.944617] [<ffffffff816e5877>] entry_SYSCALL_64_fastpath+0x1a/0xa9
> >> [ 39.946384] console [netcon0] enabled
> >> [ 39.946514] netconsole: network logging started
> >>
> >> Can this be possibly fixed?
> >
> >Could you try this ?
> >
> >diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c
> >b/drivers/net/ethernet/intel/e1000/e1000_main.c
> >index
> >f42129d09e2c23ba9fdb5cde890d50ecb7166a42..a53c41c4c4f7d1fe52f95a2cab8784a938b3820b
> > 100644
> >--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
> >+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
> >@@ -5257,9 +5257,13 @@ static void e1000_netpoll(struct net_device *netdev)
> > {
> > struct e1000_adapter *adapter = netdev_priv(netdev);
> >
> >- disable_irq(adapter->pdev->irq);
> >- e1000_intr(adapter->pdev->irq, netdev);
> >- enable_irq(adapter->pdev->irq);
> >+ if (napi_schedule_prep(&adapter->napi)) {
> >+ adapter->total_tx_bytes = 0;
> >+ adapter->total_tx_packets = 0;
> >+ adapter->total_rx_bytes = 0;
> >+ adapter->total_rx_packets = 0;
> >+ __napi_schedule(&adapter->napi);
> >+ }
>
> The machines are actually running e1000e driver, so I copied your
> approach to e1000e and it works:
>
> kern :info : [ 16.109647] netpoll: netconsole: local port 6665
> kern :info : [ 16.109961] netpoll: netconsole: local IPv4 address 0.0.0.0
> kern :info : [ 16.110346] netpoll: netconsole: interface 'eth0'
> kern :info : [ 16.110672] netpoll: netconsole: remote port 6676
> kern :info : [ 16.110991] netpoll: netconsole: remote IPv4 address
> 192.168.2.1
> kern :info : [ 16.111398] netpoll: netconsole: remote ethernet address
> ff:ff:ff:ff:ff:ff
> kern :info : [ 16.111845] netpoll: netconsole: local IP 192.168.2.3
> kern :info : [ 16.114284] console [netcon0] enabled
> kern :info : [ 16.114550] netconsole: network logging started
>
> However I'm not sure if it'll have side effects, because this
> effectively disables the various checks in e1000_intr() and
> e1000_intr_msi().
>
As far as netpoll is concerned, this should not matter.
We only want to drain packets from TX rings.
I have no idea why you hit this issue only recently, since this looks a
rather old bug to me ?
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
> b/drivers/net/ethernet/intel/e1000e/netdev.c
> index 9b4ec13..4f89873 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -6711,15 +6711,14 @@ static void e1000_netpoll(struct net_device *netdev)
> case E1000E_INT_MODE_MSIX:
> e1000_intr_msix(adapter->pdev->irq, netdev);
> break;
> - case E1000E_INT_MODE_MSI:
> - disable_irq(adapter->pdev->irq);
> - e1000_intr_msi(adapter->pdev->irq, netdev);
> - enable_irq(adapter->pdev->irq);
> - break;
> default: /* E1000E_INT_MODE_LEGACY */
> - disable_irq(adapter->pdev->irq);
> - e1000_intr(adapter->pdev->irq, netdev);
> - enable_irq(adapter->pdev->irq);
> + if (napi_schedule_prep(&adapter->napi)) {
> + adapter->total_tx_bytes = 0;
> + adapter->total_tx_packets = 0;
> + adapter->total_rx_bytes = 0;
> + adapter->total_rx_packets = 0;
> + __napi_schedule(&adapter->napi);
> + }
> break;
> }
> }
>
> Thanks,
> Fengguang
