The Marvell switches registers are organized in distinct internal SMI devices, such as PHY, Port, Global 1 or Global 2 registers sets.
Since not all chips support every registers sets or have slightly differences in them (such as old 88E6060 or new 88E6390 likely to be supported soon), make the setup code clearer now by removing a few family checks and adding flags to describe the Global 2 registers map. This patchset enables basic STP support and bridging on most chips when getting rid of a few inconsistencies in chip descriptions (patch 1) and add bridge Ageing Time support to DSA and the mv88e6xxx driver. Changes v1 -> v2: - add a write helper for pointer-data Update registers - add ageing time support Vivien Didelot (12): net: dsa: mv88e6xxx: remove basic function flags net: dsa: mv88e6xxx: split setup of Global 1 and 2 net: dsa: mv88e6xxx: extract device mapping net: dsa: mv88e6xxx: extract trunk mapping net: dsa: mv88e6xxx: add cap for MGMT Enables bits net: dsa: mv88e6xxx: rework Switch MAC setter net: dsa: mv88e6xxx: add cap for PVT net: dsa: mv88e6xxx: add cap for Priority Override net: dsa: mv88e6xxx: add cap for IRL net: dsa: support switchdev ageing time attr net: dsa: mv88e6xxx: add G1 helper for ageing time net: dsa: mv88e6xxx: add support for DSA ageing time drivers/net/dsa/mv88e6xxx/chip.c | 521 ++++++++++++++++++++++------------ drivers/net/dsa/mv88e6xxx/mv88e6xxx.h | 148 ++++++---- include/net/dsa.h | 1 + net/dsa/slave.c | 22 ++ 4 files changed, 457 insertions(+), 235 deletions(-) -- 2.9.0
