From: Ido Schimmel <ido...@mellanox.com>
Port netdevs (e.g. swXpY) that are not bridged are represented in the
device using a vPort with VID=PVID=1 (the PVID vPort), as untagged
packets entering the switch are internally tagged with the PVID VLAN.
When these packets are routed through a different port netdev they
should egress untagged.
This wasn't a problem until now, as non-bridged traffic only originated
from the CPU, which transmits packets out of the port as-is.
When a vPort is created with VID 1 mark it as egress untagged.
Signed-off-by: Ido Schimmel <ido...@mellanox.com>
Signed-off-by: Jiri Pirko <j...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index a453fff..afd06dc 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -816,6 +816,7 @@ int mlxsw_sp_port_add_vid(struct net_device *dev, __be16
__always_unused proto,
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
struct mlxsw_sp_port *mlxsw_sp_vport;
+ bool untagged = vid == 1;
int err;
/* VLAN 0 is added to HW filter when device goes up, but it is
@@ -859,7 +860,7 @@ int mlxsw_sp_port_add_vid(struct net_device *dev, __be16
__always_unused proto,
goto err_port_vid_learning_set;
}
- err = mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, true, false);
+ err = mlxsw_sp_port_vlan_set(mlxsw_sp_vport, vid, vid, true, untagged);
if (err) {
netdev_err(dev, "Failed to set VLAN membership for VID=%d\n",
vid);
--
2.5.5
