(Please resond via reply-to-all, not via the bugzilla UI) [EMAIL PROTECTED] wrote: > > http://bugzilla.kernel.org/show_bug.cgi?id=6468 > > Summary: sky2 driver doesnt work in 2.6.16-r3,-r4 but was working > in 2.6.15-r8 > Kernel Version: 2.6.16-r4 > Status: NEW > Severity: high > Owner: [EMAIL PROTECTED] > Submitter: [EMAIL PROTECTED] > > > Most recent kernel where this bug did not occur: > 2.6.15-r8 > > Distribution: > gentoo > > Hardware Environment: > Asus A38, Pentium-M 2.0GHz, 1024M RAM, Marvell Technology Group Ltd. 88E8053 > PCI-E Gigabit Ethernet Controller (rev 19) > > Problem Description: > No packets are received by programs while ifconfig counts them. No iptables > rules in effect and all chans policies set to ACCEPT. > dhcpcd fails to get response from server. tcpdump doesnt show any incoming > packets while shows outgoing. ifconfig indicates that both rx and tx get > increased! > > That driver was working for me till 2.6.15-r8. It doesn't work with 2.6.16-r3 > nor -r4. I didn't try earlier 2.6.16 kernels but will do that if needed. > > I tried to load module with disable_msi=1 but it didn't make any difference. > > Steps to reproduce: > modprobe sky2 debug=16 > dhcpcd eth0 > tcpdump -n -i eth0 >
I assume that when you say "2.6.16-r4" you actually mean "2.6.16-rc4"? Or do you mean 2.6.16.4? It matters rather a lot. So, please confirm the earliest known-to-be-broken kernel version and the latest known-to-be-working version, using the correct release identification, thanks. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
