From: Simon Horman <simon.hor...@netronome.com> Date: Thu, 16 Jun 2016 17:09:09 +0900
> This appears to be necessary and sufficient to provide > MPLS in GRE (RFC4023) support. > > This can be used by establishing an ipgre tunnel device > and then routing MPLS over it. > > The following example will forward MPLS frames received with an outermost > MPLS label 100 over tun1, a GRE tunnel. The forwarded packet will have the > outermost MPLS LSE removed and two new LSEs added with labels 200 > (outermost) and 300 (next). > > ip link add name tun1 type gre remote 10.0.99.193 local 10.0.99.192 ttl 225 > ip link set up dev tun1 > ip addr add 10.0.98.192/24 dev tun1 > ip route sh > > echo 1 > /proc/sys/net/mpls/conf/eth0/input > echo 101 > /proc/sys/net/mpls/platform_labels > ip -f mpls route add 100 as 200/300 via inet 10.0.98.193 > ip -f mpls route sh > > Also remove unnecessary braces. > > Reviewed-by: Dinan Gunawardena <dinan.gunaward...@netronome.com> > Signed-off-by: Simon Horman <simon.hor...@netronome.com> Applied, thanks Simon.
