The ixp2000 driver for the enp2611 was developed on a board with
three gigabit ports, but some enp2611 models only have two ports
(and only one onboard PM3386.) The current driver assumes there
are always three ports and so it doesn't work on the two-port
version of the board at all.
This patch adds a bit of logic to the enp2611 driver to limit the
number of ports to 2 if the second PM3386 isn't detected.
Signed-off-by: Lennert Buytenhek <[EMAIL PROTECTED]>
diff -urN linux-2.6.17-rc2.orig/drivers/net/ixp2000/enp2611.c
linux-2.6.17-rc2/drivers/net/ixp2000/enp2611.c
--- linux-2.6.17-rc2.orig/drivers/net/ixp2000/enp2611.c 2006-04-19
21:54:58.000000000 +0200
+++ linux-2.6.17-rc2/drivers/net/ixp2000/enp2611.c 2006-04-19
22:03:05.000000000 +0200
@@ -149,6 +149,8 @@
int status;
dev = nds[i];
+ if (dev == NULL)
+ continue;
status = pm3386_is_link_up(i);
if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@
static int __init enp2611_init_module(void)
{
+ int ports;
int i;
if (!machine_is_enp2611())
@@ -199,7 +202,8 @@
caleb_reset();
pm3386_reset();
- for (i = 0; i < 3; i++) {
+ ports = pm3386_port_count();
+ for (i = 0; i < ports; i++) {
nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
@@ -215,8 +219,8 @@
ixp2400_msf_init(&enp2611_msf_parameters);
- if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
- for (i = 0; i < 3; i++)
+ if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+ for (i = 0; i < ports; i++)
free_netdev(nds[i]);
return -EINVAL;
}
@@ -236,8 +240,10 @@
del_timer_sync(&link_check_timer);
ixpdev_deinit();
- for (i = 0; i < 3; i++)
- free_netdev(nds[i]);
+ for (i = 0; i < 3; i++) {
+ if (nds[i] != NULL)
free_netdev(nds[i]);
+ }
}
module_init(enp2611_init_module);
diff -urN linux-2.6.17-rc2.orig/drivers/net/ixp2000/pm3386.c
linux-2.6.17-rc2/drivers/net/ixp2000/pm3386.c
--- linux-2.6.17-rc2.orig/drivers/net/ixp2000/pm3386.c 2006-03-20
06:53:29.000000000 +0100
+++ linux-2.6.17-rc2/drivers/net/ixp2000/pm3386.c 2006-04-19
22:01:39.000000000 +0200
@@ -86,40 +86,53 @@
pm3386_reg_write(port >> 1, reg, value);
}
+int pm3386_secondary_present(void)
+{
+ return pm3386_reg_read(1, 0) == 0x3386;
+}
void pm3386_reset(void)
{
u8 mac[3][6];
+ int secondary;
+
+ secondary = pm3386_secondary_present();
/* Save programmed MAC addresses. */
pm3386_get_mac(0, mac[0]);
pm3386_get_mac(1, mac[1]);
- pm3386_get_mac(2, mac[2]);
+ if (secondary)
+ pm3386_get_mac(2, mac[2]);
/* Assert analog and digital reset. */
pm3386_reg_write(0, 0x002, 0x0060);
- pm3386_reg_write(1, 0x002, 0x0060);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0060);
mdelay(1);
/* Deassert analog reset. */
pm3386_reg_write(0, 0x002, 0x0062);
- pm3386_reg_write(1, 0x002, 0x0062);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0062);
mdelay(10);
/* Deassert digital reset. */
pm3386_reg_write(0, 0x002, 0x0063);
- pm3386_reg_write(1, 0x002, 0x0063);
+ if (secondary)
+ pm3386_reg_write(1, 0x002, 0x0063);
mdelay(10);
/* Restore programmed MAC addresses. */
pm3386_set_mac(0, mac[0]);
pm3386_set_mac(1, mac[1]);
- pm3386_set_mac(2, mac[2]);
+ if (secondary)
+ pm3386_set_mac(2, mac[2]);
/* Disable carrier on all ports. */
pm3386_set_carrier(0, 0);
pm3386_set_carrier(1, 0);
- pm3386_set_carrier(2, 0);
+ if (secondary)
+ pm3386_set_carrier(2, 0);
}
static u16 swaph(u16 x)
@@ -127,6 +140,11 @@
return ((x << 8) | (x >> 8)) & 0xffff;
}
+int pm3386_port_count(void)
+{
+ return 2 + !!pm3386_secondary_present();
+}
+
void pm3386_init_port(int port)
{
int pm = port >> 1;
diff -urN linux-2.6.17-rc2.orig/drivers/net/ixp2000/pm3386.h
linux-2.6.17-rc2/drivers/net/ixp2000/pm3386.h
--- linux-2.6.17-rc2.orig/drivers/net/ixp2000/pm3386.h 2006-03-20
06:53:29.000000000 +0100
+++ linux-2.6.17-rc2/drivers/net/ixp2000/pm3386.h 2006-04-19
21:56:55.000000000 +0200
@@ -13,6 +13,7 @@
#define __PM3386_H
void pm3386_reset(void);
+int pm3386_port_count(void);
void pm3386_init_port(int port);
void pm3386_get_mac(int port, u8 *mac);
void pm3386_set_mac(int port, u8 *mac);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
