On Wednesday 08 June 2016 14:30:08, Rob Herring wrote: > > diff --git a/Documentation/devicetree/bindings/phy/phy-leds.txt > > b/Documentation/devicetree/bindings/phy/phy-leds.txt new file mode 100644 > > index 0000000..1a35e3d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/phy-leds.txt > > @@ -0,0 +1,52 @@ > > +LED configuration for Ethernet phys > > + > > +All these properties are optional, not all properties are supported by > > +all PHYs. When more then one property name is define for one LED the > > +order they get applied is device depended. > > +Property names: > > + led-const-on: conditions the LED should be constant on > > + led-pulse: condition the LED should be pulsed on > > + led-blink-slow: condition the LED should slowly blink > > How slow is slow?
This depends on the MMD.INTERNAL.LEDCH.SBF setting which is 2 Hz by default. > > + led-blink-fast: condition the LED should fast blink > > How fast is fast? This depends on the MMD.INTERNAL.LEDCH.FBF setting which is 16 Hz by default. Both can be set independently to 2, 4, 8 or 16 Hz. Best regards, Alexander
