Hi all, This patch series builds on top of Andrew's "New DSA bind, switches as devices" patch set and does the following:
- add support for the old DSA binding with the new dsa_register_switch() API which is needed by some platforms where the Device Tree is pretty much frozen - add a few helper functions/goodies for net/dsa/dsa2.c to be as close as possible from net/dsa/dsa.c in terms of what drivers can expect, in particular the slave MDIO bus and the enabled_port_mask and phy_mii_mask - fix the CPU port ethtools ops to work in a multiple tree setup since we can no longer assume a single tree is supported - finally conver the bcm_sf2 driver to be a true platform device driver and slightly rework its internal vs. external MDIO bus indirect read/writes to be cleaner Florian Fainelli (9): net: dsa: Prepare to support legacy DT binding net: dsa: Add support for parsing the old binding net: dsa: Provide unique DSA slave MII bus names net: dsa: Initialize ds->enabled_port_mask and ds->phys_mii_mask net: dsa: Export suspend/resume functions net: dsa: Add initialization helper for CPU port ethtool_ops net: dsa: Initialize CPU port ethtool ops per tree net: dsa: bcm_sf2: Make it a real platform device driver net: dsa: bcm_sf2: Register our slave MDIO bus drivers/net/dsa/bcm_sf2.c | 390 +++++++++++++++++++++++++++++----------------- drivers/net/dsa/bcm_sf2.h | 6 + include/net/dsa.h | 14 ++ net/dsa/dsa.c | 35 ++++- net/dsa/dsa2.c | 199 ++++++++++++++++++++--- net/dsa/dsa_priv.h | 3 + net/dsa/slave.c | 25 ++- 7 files changed, 491 insertions(+), 181 deletions(-) -- 2.7.4
