On Mon, May 09, 2016 at 12:03:56PM +0200, John Crispin wrote:
> If an external Gigabit PHY is connected to either of the MACs we need to
> be able to tell the PHY to use a delay. Not doing so will result in heavy
> packet loss and/or data corruption when using PHYs such as the IC+ IP1001.
> We tell the PHY which MII delay mode to use via the devictree.
>
> The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes
> in the same way as normal rgmii when setting up the MAC.
>
> Signed-off-by: John Crispin <j...@phrozen.org>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
