6131 is the only driver to set the tag protocol to DSA_TAG_PROTO_DSA.
Since it works fine with DSA_TAG_PROTO_EDSA, change its value, like all
other mv88e6xxx drivers.
Signed-off-by: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
---
drivers/net/dsa/Kconfig | 2 +-
drivers/net/dsa/mv88e6131.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 4aaadce..7e01dce 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -17,7 +17,7 @@ config NET_DSA_MV88E6131
tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
depends on NET_DSA
select NET_DSA_MV88E6XXX
- select NET_DSA_TAG_DSA
+ select NET_DSA_TAG_EDSA
---help---
This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index cf7d710..81640f6 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -75,7 +75,7 @@ static const char *mv88e6131_drv_probe(struct device *dsa_dev,
}
struct dsa_switch_driver mv88e6131_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_DSA,
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
.probe = mv88e6131_drv_probe,
.setup = mv88e6xxx_setup,
.set_addr = mv88e6xxx_set_addr,
--
2.8.2
