The current sequence makes us register for a network device prior to
registering and probing the MDIO bus which could lead to some unwanted
consequences, like a thread of execution calling into ndo_open before
register_netdev() returns, while the MDIO bus is not ready yet.
Rework the sequence to register for the MDIO bus, and therefore attach
to a PHY prior to calling register_netdev(), which implies reworking the
error path a bit.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
Tracking down the exact commit which started doing that was a little
difficult, so I can't really provide a proper Fixes tag yet that does
not reference 4-5 commits
drivers/net/ethernet/cadence/macb.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 48a7d7dee846..e9b470a5ddd0 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -441,7 +441,7 @@ static int macb_mii_init(struct macb *bp)
snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
bp->pdev->name, bp->pdev->id);
bp->mii_bus->priv = bp;
- bp->mii_bus->parent = &bp->dev->dev;
+ bp->mii_bus->parent = &bp->pdev->dev;
pdata = dev_get_platdata(&bp->pdev->dev);
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
@@ -3019,29 +3019,36 @@ static int macb_probe(struct platform_device *pdev)
if (err)
goto err_out_free_netdev;
+ err = macb_mii_init(bp);
+ if (err)
+ goto err_out_free_netdev;
+
+ phydev = bp->phy_dev;
+
+ netif_carrier_off(dev);
+
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
- goto err_out_unregister_netdev;
+ goto err_out_unregister_mdio;
}
- err = macb_mii_init(bp);
- if (err)
- goto err_out_unregister_netdev;
-
- netif_carrier_off(dev);
+ phy_attached_info(phydev);
netdev_info(dev, "Cadence %s rev 0x%08x at 0x%08lx irq %d (%pM)\n",
macb_is_gem(bp) ? "GEM" : "MACB", macb_readl(bp, MID),
dev->base_addr, dev->irq, dev->dev_addr);
- phydev = bp->phy_dev;
- phy_attached_info(phydev);
-
return 0;
-err_out_unregister_netdev:
- unregister_netdev(dev);
+err_out_unregister_mdio:
+ phy_disconnect(bp->phy_dev);
+ mdiobus_unregister(bp->mii_bus);
+ mdiobus_free(bp->mii_bus);
+
+ /* Shutdown the PHY if there is a GPIO reset */
+ if (bp->reset_gpio)
+ gpiod_set_value(bp->reset_gpio, 0);
err_out_free_netdev:
free_netdev(dev);
--
2.1.0
