This reverts commit cfe255600154f0072d4a8695590dbd194dfd1aeb

This can result in a "Unable to handle kernel paging request"
during boot. This was due to using an uninitialised struct member,
data->slaves.

Signed-off-by: Andrew Goodbody <andrew.goodb...@cambrionix.com>
Tested-by: Tony Lindgren <t...@atomide.com>
---

v2 No code change, added signoff and collected tested-by

 drivers/net/ethernet/ti/cpsw.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 2cd67a5..54bcc38 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -349,7 +349,6 @@ struct cpsw_slave {
        struct cpsw_slave_data          *data;
        struct phy_device               *phy;
        struct net_device               *ndev;
-       struct device_node              *phy_node;
        u32                             port_vlan;
        u32                             open_stat;
 };
@@ -368,6 +367,7 @@ struct cpsw_priv {
        spinlock_t                      lock;
        struct platform_device          *pdev;
        struct net_device               *ndev;
+       struct device_node              *phy_node;
        struct napi_struct              napi_rx;
        struct napi_struct              napi_tx;
        struct device                   *dev;
@@ -1142,8 +1142,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, 
struct cpsw_priv *priv)
                cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
                                   1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
 
-       if (slave->phy_node)
-               slave->phy = of_phy_connect(priv->ndev, slave->phy_node,
+       if (priv->phy_node)
+               slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
                                 &cpsw_adjust_link, 0, slave->data->phy_if);
        else
                slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
@@ -2025,8 +2025,7 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
                if (strcmp(slave_node->name, "slave"))
                        continue;
 
-               priv->slaves[i].phy_node =
-                       of_parse_phandle(slave_node, "phy-handle", 0);
+               priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
                parp = of_get_property(slave_node, "phy_id", &lenp);
                if (of_phy_is_fixed_link(slave_node)) {
                        struct device_node *phy_node;
@@ -2267,22 +2266,12 @@ static int cpsw_probe(struct platform_device *pdev)
        /* Select default pin state */
        pinctrl_pm_select_default_state(&pdev->dev);
 
-       data = &priv->data;
-       priv->slaves = devm_kzalloc(&pdev->dev,
-                                   sizeof(struct cpsw_slave) * data->slaves,
-                                   GFP_KERNEL);
-       if (!priv->slaves) {
-               ret = -ENOMEM;
-               goto clean_runtime_disable_ret;
-       }
-       for (i = 0; i < data->slaves; i++)
-               priv->slaves[i].slave_num = i;
-
        if (cpsw_probe_dt(priv, pdev)) {
                dev_err(&pdev->dev, "cpsw: platform data missing\n");
                ret = -ENODEV;
                goto clean_runtime_disable_ret;
        }
+       data = &priv->data;
 
        if (is_valid_ether_addr(data->slave_data[0].mac_addr)) {
                memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN);
@@ -2294,6 +2283,16 @@ static int cpsw_probe(struct platform_device *pdev)
 
        memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
 
+       priv->slaves = devm_kzalloc(&pdev->dev,
+                                   sizeof(struct cpsw_slave) * data->slaves,
+                                   GFP_KERNEL);
+       if (!priv->slaves) {
+               ret = -ENOMEM;
+               goto clean_runtime_disable_ret;
+       }
+       for (i = 0; i < data->slaves; i++)
+               priv->slaves[i].slave_num = i;
+
        priv->slaves[0].ndev = ndev;
        priv->emac_port = 0;
 
-- 
2.5.0

Reply via email to