The Orange PI PC uses the H3's internal Ethernet PHY with the EMAC
Ethernet controller.
Set a proper address for the PHY and enable the EMAC.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
This patch depends on "ARM: dts: sun8i-h3: Add Ethernet controller device",
which uses an binding still in development.
Do not merge.
---
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index daf50b9a6657..f01e10df812a 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -102,6 +102,20 @@
status = "okay";
};
+&ephy {
+ allwinner,ephy-addr = <0x1>;
+};
+
+&emac {
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
--
2.7.0
