Hi, > My suggestion was that the hardware needs to control the LEDs. You > have software doing it. You might be able to do this with the PHY > state machine for link. But activity is never going to be accepted if > software control. > > The LED trigger attached to an LED should be used to configure the > hardware to drive the LED as wanted. >
The eth-phy-activity trigger uses the blink_set which I think uses the hardware acceleration if available. I am not sure how to handles LEDs which does not have hardware acceleration for this (eth-phy-activity) trigger. > The exception to this is when there is no trigger attached, and the > brightness can set the on/off state, if the hardware supports this. > > Andrew
