Initially the phy_bus_name was added to manipulate the
driver name but It was recently just used to manage the
fixed-link and then to take some decision at run-time
inside the main (for example to skip EEE).
So the patch now introduces a new platforms boolean to
manage that and removes the phy_bus_name variable not
necessary anymore.
The driver can manage the mdio registration by using phy-handle,
dwmac-mdio and own parameter e.g. snps,phy-addr.
This patch takes care about all these possible configurations
and fixes the mdio registration in case of there is a real
transceiver or a switch (that needs to be managed by using
fixed-link).
Signed-off-by: Giuseppe Cavallaro <peppe.cavall...@st.com>
Cc: Gabriel Fernandez <gabriel.fernan...@linaro.org>
Cc: Andreas Färber <afaer...@suse.de>
Cc: Frank Schäfer <fschaefer....@googlemail.com>
Cc: Dinh Nguyen <dinh.li...@gmail.com>
Cc: David S. Miller <da...@davemloft.net>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++--------
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 15 ++++++---------
include/linux/stmmac.h | 2 +-
3 files changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c21015b..87e4643 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -271,7 +271,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
*/
bool stmmac_eee_init(struct stmmac_priv *priv)
{
- char *phy_bus_name = priv->plat->phy_bus_name;
unsigned long flags;
bool ret = false;
@@ -283,7 +282,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
goto out;
/* Never init EEE in case of a switch is attached */
- if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
+ if (priv->plat->is_fixed_link)
goto out;
/* MAC core supports the EEE feature. */
@@ -820,12 +819,8 @@ static int stmmac_init_phy(struct net_device *dev)
phydev = of_phy_connect(dev, priv->plat->phy_node,
&stmmac_adjust_link, 0, interface);
} else {
- if (priv->plat->phy_bus_name)
- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
- priv->plat->phy_bus_name, priv->plat->bus_id);
- else
- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
- priv->plat->bus_id);
+ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
+ priv->plat->bus_id);
snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 6a52fa1..09684dd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -138,7 +138,12 @@ stmmac_probe_config_dt(struct platform_device *pdev, const
char **mac)
return ERR_PTR(-ENODEV);
plat->phy_node = of_node_get(np);
- }
+ plat->is_fixed_link = true;
+ } else
+ plat->mdio_bus_data =
+ devm_kzalloc(&pdev->dev,
+ sizeof(struct stmmac_mdio_bus_data),
+ GFP_KERNEL);
/* "snps,phy-addr" is not a standard property. Mark it as deprecated
* and warn of its use. Remove this when phy node support is added.
@@ -146,14 +151,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const
char **mac)
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
- plat->mdio_bus_data = NULL;
- else
- plat->mdio_bus_data =
- devm_kzalloc(&pdev->dev,
- sizeof(struct stmmac_mdio_bus_data),
- GFP_KERNEL);
-
of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index eead8ab..1550558 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -94,10 +94,10 @@ struct stmmac_dma_cfg {
};
struct plat_stmmacenet_data {
- char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;
+ bool is_fixed_link;
struct stmmac_mdio_bus_data *mdio_bus_data;
struct device_node *phy_node;
struct stmmac_dma_cfg *dma_cfg;
--
1.7.4.4
