Hello, Brandeburg, Jesse.
On 30.03.2006 06:53 you said the following:
Hi all, I've identified you as people who have at some point in the past
emailed one of the Linux lists with problems with e1000 and
sk_forward_alloc. It seems to be fairly widespread, but only seems to
have appeared with recent kernel changes (after 2.6.12...)
What I need from you is a reproducible test, and some information. I
have never been able to reproduce this, and I'm trying to isolate the
problem a bit. What motherboards are you using? What seems to cause
this problem? Are you all using iptables? Are you all routing? From
the reports I assume none of you are using an 82571/2/3 (pci express)
As far as I know e1000 has the same requirement as tg3 and some others
where we have to modify the header of the skb in the case of transmits
using TSO. I don't see anywhere else that the driver modifies the skb.
Tomorrow I'll generate a patch to try a more paranoid copying of the
skb, I hope some of you can test.
Jesse, I'd like to try your patches to help get rid of this annoying
problem. I want to say, that this problem 100% reproucible on my
hard-loading webserver based on RHEL4 with kernels 2.6.9 (rhel4
original) - 2.6.15.7 (i.e. all releases from 2.6.9 to 2.6.15.7 affected).
I have an asus 1unit server with double [EMAIL PROTECTED] processors with
enabled HyperThreading and 3Gb RAM, but with 1Gb RAM I have the same
problem, thus it's not a RAM issue. This is really high load server,
serving about 1000-1500 http requests per second plus about 500-1000 ftp
requests per second.
dmesg, lspci -vv, iptables -nL and ip route show in attached files.
Wating for your instructions.
P.S. I use two e1000 adapters at the same time with advanced routing
like this:
[EMAIL PROTECTED] ~]# cat /etc/rc.local |grep ip
# This script will be executed *after* all the other init scripts.
/sbin/ip rule add from 83.102.130.174 table NEW
/sbin/ip route add default via 83.102.130.173 dev eth0 table NEW
And also I have some hardcored sysctl options like this:
net.core.somaxconn=1024
net.ipv4.tcp_timestamps=0
net.ipv4.tcp_max_tw_buckets=720000
net.core.rmem_default=215040
net.core.rmem_max=262144
net.core.wmem_default=215040
net.core.wmem_max=262144
net.core.optmem_max=81920
net.core.netdev_max_backlog=8192
net.ipv4.neigh.default.gc_thresh1=512
net.ipv4.neigh.default.gc_thresh2=2048
net.ipv4.neigh.default.gc_thresh3=4096
net.ipv4.neigh.default.unres_qlen=64
net.ipv4.neigh.default.proxy_qlen=256
net.ipv4.tcp_rmem = 4096 131072 262144
net.ipv4.tcp_wmem = 4096 131072 262144
net.ipv4.tcp_keepalive_time=1800
net.ipv4.tcp_sack=0
net.ipv4.tcp_fin_timeout=30
net.ipv4.tcp_window_scaling=0
net.ipv4.tcp_keepalive_probes=3
kernel.sem=250 32000 100 128
--
Boris B. Zhmurov
mailto: [EMAIL PROTECTED]
"wget http://kernelpanic.ru/bb_public_key.pgp -O - | gpg --import"
Linux version 2.6.15-7.0.bbel4smp ([EMAIL PROTECTED]) (gcc version 3.4.5
20051201 (Red Hat 3.4.5-2)) #1 SMP Tue Mar 28 14:52:13 MSD 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfffb000 (usable)
BIOS-e820: 00000000bfffb000 - 00000000bffff000 (ACPI data)
BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f0830
On node 0 totalpages: 786427
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 557051 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 ASUS ) @ 0x000f55a0
ACPI: RSDT (v001 ASUS PR-DLSR 0x42302e31 MSFT 0x31313031) @ 0xbfffb000
ACPI: FADT (v001 ASUS PR-DLSR 0x42302e31 MSFT 0x31313031) @ 0xbfffb145
ACPI: BOOT (v001 ASUS PR-DLSR 0x42302e31 MSFT 0x31313031) @ 0xbfffb034
ACPI: SPCR (v001 ASUS PR-DLSR 0x42302e31 MSFT 0x31313031) @ 0xbfffb05c
ACPI: MADT (v001 ASUS PR-DLSR 0x42302e31 MSFT 0x31313031) @ 0xbfffb0a9
ACPI: DSDT (v001 ASUS PR-DLSR 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec01000)
mapped IOAPIC to ffffa000 (fec02000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0391000 soft=c0371000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2790.958 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3114260k/3145708k available (1599k kernel code, 30168k reserved, 685k
data, 188k init, 2228204k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5589.74 BogoMIPS (lpj=27948717)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c0392000 soft=c0372000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5581.58 BogoMIPS (lpj=27907945)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05
Booting processor 2/6 eip 2000
CPU 2 irqstacks, hard=c0393000 soft=c0373000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5581.69 BogoMIPS (lpj=27908471)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05
Booting processor 3/7 eip 2000
CPU 3 irqstacks, hard=c0394000 soft=c0374000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5581.78 BogoMIPS (lpj=27908908)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 05
Total of 4 processors activated (22334.80 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 656k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf18e0, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKI] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKQ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKS] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKT] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKV] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKW] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11 12 14 15) *0
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS
ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS
Boot video device is 0000:00:03.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI _CRS 1 overrides _BBN 0
ACPI: PCI Root Bridge [PCI1] (0000:01)
PCI: Probing PCI hardware (bus 01)
ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS
ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI _CRS 2 overrides _BBN 0
ACPI: PCI Root Bridge [PCI2] (0000:02)
PCI: Probing PCI hardware (bus 02)
ACPI: _BBN and _CRS returns different value for \_SB_.PCI1. Select _CRS
ACPI: _BBN and _CRS returns different value for \_SB_.PCI2. Select _CRS
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Simple Boot Flag at 0x3a set to 0x80
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 188k freed
SCSI subsystem initialized
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
megaraid: probe new device 0x1000:0x1960:0x1000:0xa520: bus 1:slot 3:func 0
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 27 (level, low) -> IRQ 16
megaraid: fw version:[1Z26] bios version:[G112]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
Vendor: SDR Model: GEM318 Rev: 0
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD0 RAID5 70090R Rev: 1Z26
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 143544320 512-byte hdwr sectors (73495 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 143544320 512-byte hdwr sectors (73495 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:2:0:0: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
0:0:11:0: Attached scsi generic sg0 type 3
sd 0:2:0:0: Attached scsi generic sg1 type 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 17
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 24 (level, low) -> IRQ 18
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Unusual config register value
piix4_smbus 0000:00:0f.0: Try using fix_hstcfg=1 if you experience problems
piix4_smbus 0000:00:0f.0: Illegal Interrupt configuration (or code out of date)!
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNK5] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNK5] -> GSI 11 (level, low) ->
IRQ 11
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.2: irq 11, io mem 0xf5000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
EXT3 FS on sda1, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
program dmraid is using a deprecated SCSI ioctl, please convert it to SG_IO
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 212 bytes per conntrack
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
e1000: eth1: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
loop: loaded (max 8 devices)
TCP: Treason uncloaked! Peer 80.72.16.78:50766/80 shrinks window
2092777962:2092777963. Repaired.
TCP: Treason uncloaked! Peer 80.72.16.78:50769/80 shrinks window
2096690385:2096690386. Repaired.
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/core/stream.c (279)
KERNEL: assertion (!sk->sk_forward_alloc) failed at net/ipv4/af_inet.c (148)
83.102.130.172/30 dev eth0 proto kernel scope link src 83.102.130.174
83.102.130.176/30 dev eth1 proto kernel scope link src 83.102.130.178
169.254.0.0/16 dev eth1 scope link
default via 83.102.130.177 dev eth1
Chain INPUT (policy DROP)
target prot opt source destination
DROP all -- 212.176.84.130 0.0.0.0/0
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 100/sec
burst 5
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
DROP all -- 127.0.0.1 0.0.0.0/0
DROP all -- 0.0.0.0/0 127.0.0.1
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3690
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5432
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 multiport dports
20,21
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp
dpts:64000:65500
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state ESTABLISHED
Chain FORWARD (policy DROP)
target prot opt source destination
Chain OUTPUT (policy DROP)
target prot opt source destination
DROP all -- 0.0.0.0/0 212.176.84.130
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 100/sec
burst 5
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state ESTABLISHED
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state NEW
00:00.0 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset) (rev 33)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.1 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.2 Host bridge: Broadcom CMIC-LE Host Bridge (GC-LE chipset)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:02.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet
Controller (rev 02)
Subsystem: Intel Corporation 82540EM Gigabit Ethernet Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple,
DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at d400 [size=256]
Region 2: Memory at f5800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: Broadcom CSB5 South Bridge (rev 93)
Subsystem: Broadcom CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93) (prog-if 8a
[Master SecP PriP])
Subsystem: Broadcom CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size 08
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at a800 [size=16]
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 Host bridge: Broadcom CSB5 LPC bridge
Subsystem: Broadcom: Unknown device 0230
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr+ DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge,
DMMRBC=0, DMOST=4, DMCRS=0, RSCEM-
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr+ DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge,
DMMRBC=0, DMOST=4, DMCRS=0, RSCEM-
01:02.0 Ethernet controller: Intel Corporation 82544GC Gigabit Ethernet
Controller (LOM) (rev 02)
Subsystem: Intel Corporation 82544GC Based Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min), Cache Line Size 08
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a400 [size=32]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device.
Command: DPERE- ERO+ RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple,
DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
01:03.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
Subsystem: LSI Logic / Symbios Logic MegaRAID ZCR SCSI 320-0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
[virtual] Expansion ROM at c4000000 [disabled] [size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
