Signed-off-by: Jeff Kirsher <[EMAIL PROTECTED]>
Signed-off-by: Jesse Brandeburg <[EMAIL PROTECTED]>
Signed-off-by: John Ronciak <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000.h | 1 +
drivers/net/e1000/e1000_ethtool.c | 31 ++++++++++++++++++++++++++++++-
drivers/net/e1000/e1000_main.c | 10 ++++++++++
3 files changed, 41 insertions(+), 1 deletions(-)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index d9ce3cd..b5eb33e 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -245,6 +245,7 @@ struct e1000_adapter {
uint32_t rx_buffer_len;
uint32_t part_num;
uint32_t wol;
+ uint32_t ksp3_port_a;
uint32_t smartspeed;
uint32_t en_mng_pt;
uint16_t link_speed;
diff --git a/drivers/net/e1000/e1000_ethtool.c
b/drivers/net/e1000/e1000_ethtool.c
index f7e81e9..f1b9cf4 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1632,10 +1632,26 @@ e1000_get_wol(struct net_device *netdev,
case E1000_DEV_ID_82546EB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
wol->supported = 0;
wol->wolopts = 0;
return;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a) {
+ wol->supported = 0;
+ return;
+ }
+ /* KSP3 does not suppport UCAST wake-ups for any interface */
+ wol->supported = WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ wol->wolopts = 0;
+ goto do_defaults;
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82571EB_FIBER:
@@ -1650,8 +1666,9 @@ e1000_get_wol(struct net_device *netdev,
default:
wol->supported = WAKE_UCAST | WAKE_MCAST |
WAKE_BCAST | WAKE_MAGIC;
-
wol->wolopts = 0;
+
+do_defaults:
if (adapter->wol & E1000_WUFC_EX)
wol->wolopts |= WAKE_UCAST;
if (adapter->wol & E1000_WUFC_MC)
@@ -1676,10 +1693,22 @@ e1000_set_wol(struct net_device *netdev,
case E1000_DEV_ID_82543GC_COPPER:
case E1000_DEV_ID_82544EI_FIBER:
case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
case E1000_DEV_ID_82545EM_FIBER:
case E1000_DEV_ID_82545EM_COPPER:
return wol->wolopts ? -EOPNOTSUPP : 0;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* device id 10B5 port-A supports wol */
+ if (!adapter->ksp3_port_a)
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ if (wol->wolopts & WAKE_UCAST) {
+ DPRINTK(DRV, ERR, "Interface does not support "
+ "directed (unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
case E1000_DEV_ID_82571EB_FIBER:
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 2a233df..11357d9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -651,6 +651,7 @@ e1000_probe(struct pci_dev *pdev,
unsigned long mmio_start, mmio_len;
static int cards_found = 0;
+ static int e1000_ksp3_port_a = 0; /* global ksp3 port a indication */
int i, err, pci_using_dac;
uint16_t eeprom_data;
uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
@@ -743,6 +744,15 @@ e1000_probe(struct pci_dev *pdev,
if ((err = e1000_check_phy_reset_block(&adapter->hw)))
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER
session.\n");
+ /* if ksp3, indicate if it's port a being setup */
+ if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
+ e1000_ksp3_port_a == 0)
+ adapter->ksp3_port_a = 1;
+ e1000_ksp3_port_a++;
+ /* Reset for multiple KP3 adapters */
+ if (e1000_ksp3_port_a == 4)
+ e1000_ksp3_port_a = 0;
+
if (adapter->hw.mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
NETIF_F_HW_CSUM |
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
