> > My system freezes (crashes) when I run tcpdump on the interface > > connected to a 3c905b card. > Works for me with a 3c980-TX. I can dig out a 905b. > Please send the exact commands which you're using to demonstrate this - > sufficient info for me to get as close as possible to what you're doing.
The exact command is: tcpdump -i eth1 Yes, it is that simple. Not only tcpdump gives this problem; iftop as well. > Have you tried enabling the NMI watchdog? Enable CONFIG_X86_LOCAL_APIC and > boot with `nmi_watchdog=1' on the command line, make sure that the NMI line > of /proc/interrupts is incrementing. I'll give it a try. I've added it to the append-line in the lilo config. Am now compiling the kernel. Folkert van Heusden -- Try MultiTail! Multiple windows with logfiles, filtered with regular expressions, colored output, etc. etc. www.vanheusden.com/multitail/ ---------------------------------------------------------------------- Get your PGP/GPG key signed at www.biglumber.com! ---------------------------------------------------------------------- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
