Hello,
Please find attached the output of dmesg from an HP nc6220 laptop
With SuSE 10.0 installed. The 'thermal management' of this machine
Is unreliable and I was wondering whether this might be caused by
An ACPI or a kernel bug, or whether the OS is to blame.
My apologies if it turns out to be a false alarm but I don't like all
These ACPI warnings and am rather weary of the machine's erratic
behaviour.
Kind regards,
Linux version 2.6.13-15.7-default ([EMAIL PROTECTED]) (gcc version 4.0.2
20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7efc00 (reserved)
BIOS-e820: 000000003f7efc00 - 000000003f7fb000 (ACPI NVS)
BIOS-e820: 000000003f7fb000 - 000000003f800000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30672 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 HP ) @ 0x000fe270
ACPI: RSDT (v001 HP 0944 0x15090520 HP 0x00000001) @ 0x3f7efc84
ACPI: FADT (v002 HP 0944 0x00000002 HP 0x00000001) @ 0x3f7efc00
ACPI: MADT (v001 HP 0944 0x00000001 HP 0x00000001) @ 0x3f7efcbc
ACPI: MCFG (v001 HP 0944 0x00000001 HP 0x00000001) @ 0x3f7efd18
ACPI: SSDT (v001 HP HPQPpc 0x00001001 MSFT 0x0100000e) @ 0x3f7f7fce
ACPI: SSDT (v001 HP HPQNLP 0x00000001 MSFT 0x0100000e) @ 0x3f7f833f
ACPI: DSDT (v001 HP nc6200 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: local apic disabled
Allocating PCI resources starting at 3f800000 (gap: 3f800000:a0800000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 vga=0x314 selinux=0 acpi=on pci=noacpi
reboot=b resume=/dev/hda2 splash=silent showopts
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1862.419 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1025212k/1040192k available (2029k kernel code, 14032k reserved, 695k
data, 204k init, 122688k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3729.88 BogoMIPS (lpj=7459769)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180
00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1700k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0e00 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050408
ACPI-0309: *** Warning: Unknown GPE method type: C274 (name not of form
_Lxx or _Exx)
ACPI-0309: *** Warning: Unknown GPE method type: C1EB (name not of form
_Lxx or _Exx)
ACPI-0309: *** Warning: Unknown GPE method type: C275 (name not of form
_Lxx or _Exx)
ACPI-0309: *** Warning: Unknown GPE method type: C276 (name not of form
_Lxx or _Exx)
ACPI-0309: *** Warning: Unknown GPE method type: C1CD (name not of form
_Lxx or _Exx)
ACPI-0309: *** Warning: Unknown GPE method type: C216 (name not of form
_Lxx or _Exx)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [C1CB] (on)
ACPI: Embedded Controller [C004] (gpe 16)
ACPI: Power Resource [C1A5] (on)
ACPI: Power Resource [C1AD] (on)
ACPI: Power Resource [C1B4] (on)
ACPI: Power Resource [C1C4] (on)
ACPI: Power Resource [C267] (off)
ACPI: Power Resource [C268] (off)
ACPI: Power Resource [C269] (off)
ACPI: Power Resource [C26A] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.C002] segment is 0
ACPI: Assume root bridge [\_SB_.C002] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1c.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:10:00.0
PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:1c.1
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED])
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x107f could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: d0000000-d03fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 40000000-41ffffff
MEM window: 42000000-43ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-4fff
MEM window: d0400000-d07fffff
PREFETCH window: 40000000-41ffffff
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 10 for device 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:10:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI-0212: *** Warning: Device is not power manageable
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 11 for device 0000:02:06.0
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:06.5
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1134335423.136:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Found IRQ 10 for device 0000:00:1c.0
PCI: Sharing IRQ 10 with 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:10:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
PCI: Device 0000:00:1c.1 not available because of resource collisions
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total
7872k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518
bytes,<6>...found (800x600, 8809 bytes, v3).
Console: switching to colour frame buffer device 99x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:C1C1,PNP0f13:C1C2] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 10 for device 0000:00:1e.3
PCI: Sharing IRQ 10 with 0000:02:06.4
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Using IPI Shortcut mode
ACPI wakeup devices:
C06D C0BE C0C5 C0C6 C0C8 C006 C007 C0DE C1CE
ACPI: (supports S0 S3 S4 S4bios S5)
Freeing unused kernel memory: 204k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:10:00.0
ICH6: chipset revision 3
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2580-0x2587, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST9808211A, ATA DISK drive
hdb: UJDA765aDVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [C000] (supports 8 throttling states)
ACPI: Thermal Zone [TZ1] (55 C)
ACPI: Thermal Zone [TZ2] (48 C)
ACPI: Thermal Zone [TZ3] (27 C)
ACPI: Fan [C26B] (off)
ACPI: Fan [C26C] (off)
ACPI: Fan [C26D] (off)
ACPI: Fan [C26E] (on)
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
Attempting manual resume
swsusp: Suspend partition has wrong signature?
input: PS/2 Generic Mouse on synaptics-pt/serio0
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 1050832k swap on /dev/hda2. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036b920(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8126 buckets, 65008 max) - 248 bytes per conntrack
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.C002 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.C002 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
hw_random: RNG not detected
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
PCI: Found IRQ 10 for device 0000:00:1d.0
PCI: Sharing IRQ 10 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00002000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:00:1c.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:06.0
PCI: Sharing IRQ 11 with 0000:02:06.5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00002040
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 10 for device 0000:00:1d.7
PCI: Sharing IRQ 10 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0980000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
PCI: Found IRQ 11 for device 0000:00:1e.2
PCI: Sharing IRQ 11 with 0000:02:04.0
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ieee80211_crypt: module not supported by Novell, setting U taint flag.
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: module not supported by Novell, setting U taint flag.
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]>
ipw2200: module not supported by Novell, setting U taint flag.
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
intel8x0_measure_ac97_clock: measured 55514 usecs
intel8x0: clocking to 48000
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 11 for device 0000:02:04.0
PCI: Sharing IRQ 11 with 0000:00:1e.2
tg3.c:v3.37 (August 25, 2005)
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 10 for device 0000:10:00.0
PCI: Sharing IRQ 10 with 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Setting latency timer of device 0000:10:00.0 to 64
eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit)
10/100/1000BaseT Ethernet 00:14:c2:d5:28:19
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
PCI: Found IRQ 11 for device 0000:02:06.0
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:06.5
Yenta: CardBus bridge found at 0000:02:06.0 [103c:0944]
Yenta: ISA IRQ mask 0x0078, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
cs: IO port probe 0x3000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0400000 - 0xd07fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ieee80211_crypt_wep: module not supported by Novell, setting U taint flag.
ieee80211_crypt: registered algorithm 'WEP'
NET: Registered protocol family 17
[drm] Initialized drm 1.0.0 20040925
ACPI-0212: *** Warning: Device is not power manageable
PCI: Found IRQ 10 for device 0000:00:02.0
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:10:00.0
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x400000
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0xc0020000) is not aligned on a size(0x800000) boundary
mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x400000
eth0: no IPv6 routers present
ACPI: AC Adapter [C172] (on-line)
ACPI: Battery Slot [C174] (battery present)
ACPI: Battery Slot [C173] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1EC]
ACPI: Lid Switch [C1ED]
IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]>
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
bootsplash: status on console 0 changed to on
bootsplash: status on console 0 changed to on
subfs 0.9
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is on for TX and on for RX.
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=71 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=51
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=71 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=51
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=71 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=51
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
eth1: no IPv6 routers present
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.2.100 DST=224.0.0.251
LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x89 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-0472: *** Warning: Error transitioning device [C26E] to D0
ACPI-0275: *** Warning: Error transitioning device [C26E] to D0
ACPI-0629: *** Warning: Unable to turn cooling device [dffe3aa0] 'on'
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xb3 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe18a0|1|0], AE_TIME
ACPI-1048: *** Warning: Failed to acquire semaphore[dffe19a0|1|0], AE_TIME
