From: Marcelo Feitoza Parisi <[EMAIL PROTECTED]>
They deal with wrapping correctly and are nicer to read. Also make
jiffies-holding variables unsigned long.
Signed-off-by: Marcelo Feitoza Parisi <[EMAIL PROTECTED]>
Signed-off-by: Alexey Dobriyan <[EMAIL PROTECTED]>
---
drivers/net/3c523.c | 9 +++++----
drivers/net/3c59x.c | 3 ++-
drivers/net/apne.c | 7 ++++---
drivers/net/arcnet/arcnet.c | 3 ++-
drivers/net/arm/etherh.c | 3 ++-
drivers/net/eth16i.c | 11 ++++++-----
drivers/net/hamradio/baycom_epp.c | 2 +-
drivers/net/hp100.c | 5 +++--
drivers/net/ne-h8300.c | 5 +++--
drivers/net/ne.c | 7 ++++---
drivers/net/ne2.c | 7 ++++---
drivers/net/ns83820.c | 5 +++--
drivers/net/oaknet.c | 3 ++-
drivers/net/pcmcia/3c589_cs.c | 3 ++-
drivers/net/ppp_async.c | 3 ++-
drivers/net/seeq8005.c | 5 +++--
drivers/net/shaper.c | 3 ++-
drivers/net/tokenring/lanstreamer.c | 3 ++-
drivers/net/tokenring/olympic.c | 9 +++++----
drivers/net/tulip/pnic.c | 3 ++-
drivers/net/wireless/strip.c | 4 ++--
drivers/net/zorro8390.c | 7 ++++---
22 files changed, 65 insertions(+), 45 deletions(-)
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -105,6 +105,7 @@
#include <linux/mca-legacy.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
@@ -658,7 +659,7 @@ static int init586(struct net_device *de
s = jiffies; /* warning: only active with interrupts on !! */
while (!(cfg_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
@@ -684,7 +685,7 @@ static int init586(struct net_device *de
s = jiffies;
while (!(ias_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
@@ -709,7 +710,7 @@ static int init586(struct net_device *de
s = jiffies;
while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100) {
+ if (time_after(jiffies, s + 30*HZ/100)) {
printk(KERN_WARNING "%s: %d Problems while running the
TDR.\n", dev->name, __LINE__);
result = 1;
break;
@@ -798,7 +799,7 @@ static int init586(struct net_device *de
elmc_id_attn586();
s = jiffies;
while (!(mc_cmd->cmd_status & STAT_COMPL)) {
- if (jiffies - s > 30*HZ/100)
+ if (time_after(jiffies, s + 30*HZ/100))
break;
}
if (!(mc_cmd->cmd_status & STAT_COMPL)) {
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -258,6 +258,7 @@ static int vortex_debug = 1;
#include <linux/highmem.h>
#include <linux/eisa.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/irq.h> /* For NR_IRQS only. */
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -2717,7 +2718,7 @@ boomerang_rx(struct net_device *dev)
skb = dev_alloc_skb(PKT_BUF_SZ);
if (skb == NULL) {
static unsigned long last_jif;
- if ((jiffies - last_jif) > 10 * HZ) {
+ if (time_after(jiffies, last_jif + 10 * HZ)) {
printk(KERN_WARNING "%s: memory
shortage\n", dev->name);
last_jif = jiffies;
}
--- a/drivers/net/apne.c
+++ b/drivers/net/apne.c
@@ -36,6 +36,7 @@
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -216,7 +217,7 @@ static int __init apne_probe1(struct net
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(" not found (no reset ack).\n");
return -ENODEV;
}
@@ -382,7 +383,7 @@ apne_reset_8390(struct net_device *dev)
/* This check _should_not_ be necessary, omit eventually. */
while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk("%s: ne_reset_8390() did not complete.\n", dev->name);
break;
}
@@ -530,7 +531,7 @@ apne_block_output(struct net_device *dev
dma_start = jiffies;
while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
apne_reset_8390(dev);
NS8390_init(dev,1);
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -52,6 +52,7 @@
#include <net/arp.h>
#include <linux/init.h>
#include <linux/arcdevice.h>
+#include <linux/jiffies.h>
/* "do nothing" functions for protocol drivers */
static void null_rx(struct net_device *dev, int bufnum,
@@ -733,7 +734,7 @@ static void arcnet_timeout(struct net_de
spin_unlock_irqrestore(&lp->lock, flags);
- if (jiffies - lp->last_timeout > 10*HZ) {
+ if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh,
dest=%02Xh)\n",
msg, status, lp->intmask, lp->lasttrans_dest);
lp->last_timeout = jiffies;
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -46,6 +46,7 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/ecard.h>
@@ -356,7 +357,7 @@ etherh_block_output (struct net_device *
dma_start = jiffies;
while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
dev->name);
etherh_reset (dev);
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -161,6 +161,7 @@ static char *version =
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -754,7 +755,7 @@ static void eth16i_set_port(int ioaddr,
static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
{
- int starttime;
+ unsigned long starttime;
outb(0xff, ioaddr + TX_STATUS_REG);
@@ -765,7 +766,7 @@ static int eth16i_send_probe_packet(int
outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
return -1;
}
}
@@ -775,18 +776,18 @@ static int eth16i_send_probe_packet(int
static int eth16i_receive_probe_packet(int ioaddr)
{
- int starttime;
+ unsigned long starttime;
starttime = jiffies;
while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime + TX_TIMEOUT)) {
if(eth16i_debug > 1)
printk(KERN_DEBUG "Timeout occurred waiting
transmit packet received\n");
starttime = jiffies;
while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
- if( (jiffies - starttime) > TX_TIMEOUT) {
+ if( time_after(jiffies, starttime +
TX_TIMEOUT)) {
if(eth16i_debug > 1)
printk(KERN_DEBUG "Timeout
occurred waiting receive packet\n");
return -1;
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -905,7 +905,7 @@ static int epp_open(struct net_device *d
/* autoprobe baud rate */
tstart = jiffies;
i = 0;
- while ((signed)(jiffies-tstart-HZ/3) < 0) {
+ while (time_before(jiffies, tstart + HZ/3)) {
if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
goto epptimeout;
if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -115,6 +115,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
@@ -1499,7 +1500,7 @@ static int hp100_start_xmit_bm(struct sk
printk("hp100: %s: start_xmit_bm: No TX PDL available.\n",
dev->name);
#endif
/* not waited long enough since last tx? */
- if (jiffies - dev->trans_start < HZ)
+ if (time_before(jiffies, dev->trans_start + HZ))
return -EAGAIN;
if (hp100_check_lan(dev))
@@ -1652,7 +1653,7 @@ static int hp100_start_xmit(struct sk_bu
printk("hp100: %s: start_xmit: tx free mem = 0x%x\n",
dev->name, i);
#endif
/* not waited long enough since last failed tx try? */
- if (jiffies - dev->trans_start < HZ) {
+ if (time_before(jiffies, dev->trans_start + HZ)) {
#ifdef HP100_DEBUG
printk("hp100: %s: trans_start timing problem\n",
dev->name);
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -27,6 +27,7 @@ static const char version1[] =
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -365,7 +366,7 @@ static void ne_reset_8390(struct net_dev
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not
complete.\n", dev->name);
break;
}
@@ -580,7 +581,7 @@ retry:
#endif
while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) {
/* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx
RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -50,6 +50,7 @@ static const char version2[] =
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -350,7 +351,7 @@ static int __init ne_probe1(struct net_d
outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
if (bad_card) {
printk(" (warning: no reset ack)");
break;
@@ -589,7 +590,7 @@ static void ne_reset_8390(struct net_dev
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not
complete.\n", dev->name);
break;
}
@@ -796,7 +797,7 @@ retry:
#endif
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) {
/* 20ms */
printk(KERN_WARNING "%s: timeout waiting for Tx
RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
--- a/drivers/net/ne2.c
+++ b/drivers/net/ne2.c
@@ -75,6 +75,7 @@ static const char *version = "ne2.c:v0.9
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -403,7 +404,7 @@ static int __init ne2_probe1(struct net_
outb(inb(base_addr + NE_RESET), base_addr + NE_RESET);
while ((inb_p(base_addr + EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(" not found (no reset ack).\n");
retval = -ENODEV;
goto out;
@@ -556,7 +557,7 @@ static void ne_reset_8390(struct net_dev
/* This check _should_not_ be necessary, omit eventually. */
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk("%s: ne_reset_8390() did not complete.\n",
dev->name);
break;
@@ -757,7 +758,7 @@ retry:
#endif
while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) {
/* 20ms */
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
ne_reset_8390(dev);
NS8390_init(dev,1);
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -115,6 +115,7 @@
#include <linux/ethtool.h>
#include <linux/timer.h>
#include <linux/if_vlan.h>
+#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -1606,7 +1607,7 @@ static void ns83820_run_bist(struct net_
{
struct ns83820 *dev = PRIV(ndev);
int timed_out = 0;
- long start;
+ unsigned long start;
u32 status;
int loops = 0;
@@ -1624,7 +1625,7 @@ static void ns83820_run_bist(struct net_
break;
if (status & fail)
break;
- if ((jiffies - start) >= HZ) {
+ if (time_after_eq(jiffies, start + HZ)) {
timed_out = 1;
break;
}
--- a/drivers/net/oaknet.c
+++ b/drivers/net/oaknet.c
@@ -20,6 +20,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <asm/board.h>
#include <asm/io.h>
@@ -606,7 +607,7 @@ retry:
#endif
while ((ei_ibp(base + EN0_ISR) & ENISR_RDC) == 0) {
- if (jiffies - start > OAKNET_WAIT) {
+ if (time_after(jiffies, start + OAKNET_WAIT)) {
printk("%s: timeout waiting for Tx RDC.\n", dev->name);
oaknet_reset_8390(dev);
NS8390_init(dev, TRUE);
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -39,6 +39,7 @@
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -844,7 +845,7 @@ static void media_check(unsigned long ar
media = inw(ioaddr+WN4_MEDIA) & 0xc810;
/* Ignore collisions unless we've had no irq's recently */
- if (jiffies - lp->last_irq < HZ) {
+ if (time_before(jiffies, lp->last_irq + HZ)) {
media &= ~0x0010;
} else {
/* Try harder to detect carrier errors */
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -30,6 +30,7 @@
#include <linux/ppp_channel.h>
#include <linux/spinlock.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/string.h>
@@ -577,7 +578,7 @@ ppp_async_encode(struct asyncppp *ap)
* character if necessary.
*/
if (islcp || flag_time == 0
- || jiffies - ap->last_xmit >= flag_time)
+ || time_after_eq(jiffies, ap->last_xmit + flag_time))
*buf++ = PPP_FLAG;
ap->last_xmit = jiffies;
fcs = PPP_INITFCS;
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -46,6 +46,7 @@ static const char version[] =
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/io.h>
@@ -699,7 +700,7 @@ static void hardware_send_packet(struct
int ioaddr = dev->base_addr;
int status = inw(SEEQ_STATUS);
int transmit_ptr = 0;
- int tmp;
+ unsigned long tmp;
if (net_debug>4) {
printk("%s: send 0x%04x\n",dev->name,length);
@@ -724,7 +725,7 @@ static void hardware_send_packet(struct
/* drain FIFO */
tmp = jiffies;
- while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) &&
(jiffies - tmp < HZ))
+ while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) &&
time_before(jiffies, tmp + HZ))
mb();
/* doit ! */
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -83,6 +83,7 @@
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/if_shaper.h>
+#include <linux/jiffies.h>
#include <net/dst.h>
#include <net/arp.h>
@@ -168,7 +169,7 @@ static int shaper_start_xmit(struct sk_b
/*
* Queue over time. Spill packet.
*/
- if(SHAPERCB(skb)->shapeclock-jiffies > SHAPER_LATENCY) {
+ if(time_after(SHAPERCB(skb)->shapeclock,jiffies +
SHAPER_LATENCY)) {
dev_kfree_skb(skb);
shaper->stats.tx_dropped++;
} else
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -122,6 +122,7 @@
#include <linux/spinlock.h>
#include <linux/version.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <net/checksum.h>
@@ -512,7 +513,7 @@ static int streamer_reset(struct net_dev
while (!((readw(streamer_mmio + SISR)) & SISR_SRB_REPLY)) {
msleep_interruptible(100);
- if (jiffies - t > 40 * HZ) {
+ if (time_after(jiffies, t + 40 * HZ)) {
printk(KERN_ERR
"IBM PCI tokenring card not responding\n");
release_region(dev->base_addr, STREAMER_IO_SPACE);
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -100,6 +100,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/jiffies.h>
#include <net/checksum.h>
@@ -307,7 +308,7 @@ static int __devinit olympic_init(struct
t=jiffies;
while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) {
schedule();
- if(jiffies-t > 40*HZ) {
+ if(time_after(jiffies, t + 40*HZ)) {
printk(KERN_ERR "IBM PCI tokenring card not
responding.\n");
return -ENODEV;
}
@@ -359,7 +360,7 @@ static int __devinit olympic_init(struct
t=jiffies;
while (!readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE) {
schedule() ;
- if(jiffies-t > 2*HZ) {
+ if(time_after(jiffies, t + 2*HZ)) {
printk(KERN_ERR "IBM Cardbus tokenring adapter
not responsing.\n") ;
return -ENODEV;
}
@@ -373,7 +374,7 @@ static int __devinit olympic_init(struct
t=jiffies;
while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) {
schedule();
- if(jiffies-t > 15*HZ) {
+ if(time_after(jiffies, t + 15*HZ)) {
printk(KERN_ERR "IBM PCI tokenring card not
responding.\n");
return -ENODEV;
}
@@ -519,7 +520,7 @@ static int olympic_open(struct net_devic
olympic_priv->srb_queued=0;
break;
}
- if ((jiffies-t) > 10*HZ) {
+ if (time_after(jiffies, t + 10*HZ)) {
printk(KERN_WARNING "%s: SRB timed out.
\n",dev->name) ;
olympic_priv->srb_queued=0;
break ;
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/jiffies.h>
#include "tulip.h"
@@ -68,7 +69,7 @@ void pnic_lnk_change(struct net_device *
*/
if (tulip_media_cap[dev->if_port] & MediaIsMII)
return;
- if (! tp->nwayset || jiffies - dev->trans_start > 1*HZ) {
+ if (! tp->nwayset || time_after(jiffies, dev->trans_start +
1*HZ)) {
tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff);
iowrite32(tp->csr6, ioaddr + CSR6);
iowrite32(0x30, ioaddr + CSR12);
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -112,7 +112,7 @@ static const char StripVersion[] = "1.3A
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/time.h>
-
+#include <linux/jiffies.h>
/************************************************************************/
/* Useful structures and definitions */
@@ -1569,7 +1569,7 @@ static int strip_xmit(struct sk_buff *sk
del_timer(&strip_info->idle_timer);
- if (jiffies - strip_info->pps_timer > HZ) {
+ if (time_after(jiffies, strip_info->pps_timer + HZ)) {
unsigned long t = jiffies - strip_info->pps_timer;
unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8
+ t / 2) / t;
unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8
+ t / 2) / t;
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -27,6 +27,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/zorro.h>
+#include <linux/jiffies.h>
#include <asm/system.h>
#include <asm/irq.h>
@@ -151,7 +152,7 @@ static int __devinit zorro8390_init(stru
z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING " not found (no reset ack).\n");
return -ENODEV;
}
@@ -273,7 +274,7 @@ static void zorro8390_reset_8390(struct
/* This check _should_not_ be necessary, omit eventually. */
while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
- if (jiffies - reset_start_time > 2*HZ/100) {
+ if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n",
dev->name);
break;
@@ -400,7 +401,7 @@ static void zorro8390_block_output(struc
dma_start = jiffies;
while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
- if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+ if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n",
dev->name);
zorro8390_reset_8390(dev);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
