Begin forwarded message:
Date: Wed, 7 Sep 2005 06:16:22 -0700 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 5201] New: Badness in dst_release at include/net/dst.h:154 http://bugzilla.kernel.org/show_bug.cgi?id=5201 Summary: Badness in dst_release at include/net/dst.h:154 Kernel Version: Linux version 2.6.13 ([EMAIL PROTECTED]) (gcc version 3.4. Status: NEW Severity: high Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Most recent kernel where this bug did not occur: [unknown] Distribution: Sorcerer Hardware Environment: # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0778-077a : parport0 0cf8-0cff : PCI conf1 a000-a03f : 0000:00:0d.0 a000-a03f : e100 a400-a43f : 0000:00:0b.0 a400-a43f : e100 a800-a83f : 0000:00:0a.0 a800-a83f : e100 b000-b03f : 0000:00:09.0 b000-b03f : e100 b400-b41f : 0000:00:04.2 b400-b41f : uhci_hcd b800-b80f : 0000:00:04.1 b800-b807 : ide0 b808-b80f : ide1 d000-dfff : PCI Bus #01 d800-d8ff : 0000:01:00.0 e400-e43f : 0000:00:04.3 e400-e43f : motherboard e400-e403 : PM1a_EVT_BLK e404-e405 : PM1a_CNT_BLK e408-e40b : PM_TMR e40c-e40f : GPE0_BLK e410-e415 : ACPI CPU throttle e800-e81f : 0000:00:04.3 e800-e80f : motherboard e800-e80f : pnp 00:02 e800-e807 : piix4-smbus # cat /proc/iomem 00000000-0009ffff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000c8fff : Adapter ROM 000cc000-000ccfff : Adapter ROM 000d0000-000d0fff : Adapter ROM 000d4000-000d57ff : Adapter ROM 000f0000-000fffff : System ROM 00100000-1fffbfff : System RAM 00100000-004a9e9a : Kernel code 004a9e9b-0060a4a7 : Kernel data 1fffc000-1fffefff : ACPI Tables 1ffff000-1fffffff : ACPI Non-volatile Storage 20000000-200fffff : 0000:00:09.0 20100000-201fffff : 0000:00:0a.0 20200000-202fffff : 0000:00:0b.0 20300000-203fffff : 0000:00:0d.0 de000000-de0fffff : 0000:00:0d.0 de000000-de0fffff : e100 de800000-de800fff : 0000:00:0d.0 de800000-de800fff : e100 df000000-df0fffff : 0000:00:0b.0 df000000-df0fffff : e100 df800000-df800fff : 0000:00:0b.0 df800000-df800fff : e100 e0000000-e00fffff : 0000:00:0a.0 e0000000-e00fffff : e100 e0800000-e0800fff : 0000:00:0a.0 e0800000-e0800fff : e100 e1000000-e10fffff : 0000:00:09.0 e1000000-e10fffff : e100 e1800000-e1800fff : 0000:00:09.0 e1800000-e1800fff : e100 e2000000-e2afffff : PCI Bus #01 e2000000-e2000fff : 0000:01:00.0 e2f00000-e3ffffff : PCI Bus #01 e2f00000-e2f1ffff : 0000:01:00.0 e3000000-e3ffffff : 0000:01:00.0 e4000000-e7ffffff : 0000:00:00.0 ffff0000-ffffffff : reserved # lspci -vvv 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Subsystem: Asustek Computer, Inc.: Unknown device 8024 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e2000000-e2afffff Prefetchable memory behind bridge: e2f00000-e3ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+ 00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at b800 [size=16] 00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin D routed to IRQ 5 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at b400 [size=32] 00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9 00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: IBM 10/100 EtherJet Adapter with Alert on LAN Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at e1800000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b000 [size=64] Region 2: Memory at e1000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 20000000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 12 Region 0: Memory at e0800000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at a800 [size=64] Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 20100000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 00:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at df800000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at a400 [size=64] Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 20200000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter with Alert On LAN* Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at de800000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at a000 [size=64] Region 2: Memory at de000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at 20300000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+, D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0084 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3000000 (32-bit, prefetchable) [size=16M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at e2f00000 [disabled] [size=128K] Capabilities: [5c] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Software Environment: Gnu C 3.4.4 Gnu make 3.80 binutils 2.15 util-linux 2.12q mount 2.12q module-init-tools 3.1 e2fsprogs 1.38 jfsutils 1.1.8 reiserfsprogs 3.6.19 reiser4progs line xfsprogs 2.6.36 nfs-utils 1.0.7 Linux C Library 2.3.5 Dynamic linker (ldd) 2.3.5 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 udev 068 Modules Loaded ohci_hcd ehci_hcd e100 i2c_piix4 i2c_core uhci_hcd usbcore Problem Description: I am using linux and quagga (latest release) for a small network. It does load- balancing between 3 ISPs. If I only make a default route (the hard way - route add default gw xxx.xxx.xxx. xxx) everything is more then OK, but AFAIK this is not the way to handle routes in BGP. So I did registered the three gateways in zebra as default routes. After a couple of minutes, the kernel oopses: I have googled the problem and showed up only one article: https://www.redhat.com/archives/fedora-test-list/2005-May/msg00373.html Maybe, if we find out the problem, we can let the poor guy know ;) Steps to reproduce: //-- zebra.conf [part] ip route 0.0.0.0/0 85.186.56.129 ip route 0.0.0.0/0 194.105.21.65 ip route 0.0.0.0/0 212.146.86.161 //-- END please ask anything that you think it will be usefull, and I will gladlly provide it to you. Thank you, Deac Mihai-Adrian MiKe software&network SRL Deva, B-dul DECEBAL, bl C, sc C, ap 83, jud Hunedoara tel: +40-745-256364, fax: +40-354-401232 e-mail: [EMAIL PROTECTED] ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
