2009/6/3 venkatgiri <venkatgir...@globaledgesoft.com>: > The question is, > when SNMP manager does snmpwalk on this table > 1. the snmpwalk will give all the three rows values > 2. the snmpwalk will give the values of the row whose rowstatus is "active"
There is no value associated with a row. Values are associated with individual column instances within a row. But yes - the agent should return values for any such instances that it knows about. Either values that have been explicitly specified, or default values (either from the MIB definition or some other source). I note that in your second example, the status of the row is 'notInService' (rather than 'notReady'). Presumably the agent will therefore be supplying a default value for column 'd' (unless this column is optional). Assuming the same holds true for the third example, I'd expect that the only value missing from the "snmpwalk" output would be 'c.3' Dave ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
