Anyone has a ZTE sales contact in the US, specifically in the New England region?
Seems like something I may want to look into.. Tired of SmartNet.. Regards.. -----Original Message----- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Baldur Norddahl Sent: Friday, April 14, 2017 6:02 AM To: nanog@nanog.org Subject: Re: 10G MetroE 1-2U Switch The ZTE ZXR10 5960 will do MPLS for about 3k USD: http://www.edgetech.lv/wp-content/uploads/2015/03/ZTE-ZXR10-5960-Series-All-10-Gigabit-Switch-Datasheet.pdf 24x 10G and 2x 40G We use them for L2VPN (VPLS). I have not done QOS on this hardware, so I can not say how well that works. Regards, Baldur Den 13/04/2017 kl. 23.37 skrev Erik Sundberg: > Hey Nanog, > > Looking for a new metroE Edge switch that has more that 10x 10G ports. I am > having a hard time finding anything worthwhile without buying a full blown > ASR9K Chassis or another vendor's chassis. > > Requirements > MEF compliant > 1-2U small foot print > 10G Ports will be used for ENNI's and UNI Ports Prefer MPLS support > for L2VPN's (EoMPLS and VPLS) QOS per Sub interface\vlan on a ENNI > Cost effect 10G Ports 100G Not required > > > Looking at the > ASR920's - Great box for 1G but not enough 10G Ports Only 4 > NCS5001/NCS5501 - New\unproven\probably buggy, Lacking some features & QOS > issues :/ > ASR900 - Looks good, but was hoping for a smaller foot print. If I remember > right the 8x10G Cards can't go in every slot. > > Any other platforms I should be looking at? > > Ciena, Brocade, Juniper? > > > > Thanks in advance! > > -Erik > > ________________________________ > > CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or > previous e-mail messages attached to it may contain confidential information > that is legally privileged. If you are not the intended recipient, or a > person responsible for delivering it to the intended recipient, you are > hereby notified that any disclosure, copying, distribution or use of any of > the information contained in or attached to this transmission is STRICTLY > PROHIBITED. If you have received this transmission in error please notify the > sender immediately by replying to this e-mail. You must destroy the original > transmission and its attachments without reading or saving in any manner. > Thank you. _______________________________________________________________________ This e-mail message and its attachments are for the sole use of the intended recipients. They may contain confidential information, legally privileged information or other information subject to legal restrictions. If you are not the intended recipient of this message, please do not read, copy, use or disclose this message or its attachments, notify the sender by replying to this message and delete or destroy all copies of this message and attachments in all media.
